- Joined
- Jul 16, 2012
- Messages
- 4,177
Two fixed blades for sale:
Prices include shipping and PP fees. I only accept PP.
No trades at this time.
US shipping only.
If payment is not received promptly the knife will go back up for sale.
PM or email for questions and to get PP address.
1) Shaerk O1 Bushcrafter - carried once if I recall but never used. Only issues are the finishing marks on plunge lines and some glue can be seen between the liners and the tang (see last three pics). Otherwise this is a nice knife that feels good in the hand and the walnut is beautiful. Comes with the sheath pictures.
SOLD
Specs:
5/32" O1 tool steel 59-60 rockwell
Overall length 8-3/4"
Blade is 4-3/8" tip to scales
Height is 1-1/4"
Blade geometry is Flat Grind with sharp convexed edge polished with leather strop
Satin finished with fine scotchbrite belt
Makers mark is acid etched
Highly Figured Fiddleback Black Walnut with yellow liners and Brass pins and thong hole tube.
2) Childress CF Neck Knife - Never carried or used. This knife came from the maker with a terrible blade tip and scratch marks on the blade, I sent it back to have the tip fixed so it is better (although not great). I tried to take pics of it. It has a nice convex edge on it that is very sharp. There are also a few small pits/holes in the CF handle, this occurs in some CF when it is finished because of air bubbles. Due to these issues I am deeply discounting this one. NOTE: The tip is not as bad as it looks in the first two pics there is a reflection making it hard to see. See the last two pics.
SOLD
Specs:
440C stainless steel, RC57-59, .090 thick
2 1/2 in, hand rubbed blade, 6 in. overall length, full tang
black carbon fiber handles with red and white liners
3/16 hand made mosaic pins, ss thong hole liner, red lanyard with medal beads
Prices include shipping and PP fees. I only accept PP.
No trades at this time.
US shipping only.
If payment is not received promptly the knife will go back up for sale.
PM or email for questions and to get PP address.
1) Shaerk O1 Bushcrafter - carried once if I recall but never used. Only issues are the finishing marks on plunge lines and some glue can be seen between the liners and the tang (see last three pics). Otherwise this is a nice knife that feels good in the hand and the walnut is beautiful. Comes with the sheath pictures.
SOLD
Specs:
5/32" O1 tool steel 59-60 rockwell
Overall length 8-3/4"
Blade is 4-3/8" tip to scales
Height is 1-1/4"
Blade geometry is Flat Grind with sharp convexed edge polished with leather strop
Satin finished with fine scotchbrite belt
Makers mark is acid etched
Highly Figured Fiddleback Black Walnut with yellow liners and Brass pins and thong hole tube.
2) Childress CF Neck Knife - Never carried or used. This knife came from the maker with a terrible blade tip and scratch marks on the blade, I sent it back to have the tip fixed so it is better (although not great). I tried to take pics of it. It has a nice convex edge on it that is very sharp. There are also a few small pits/holes in the CF handle, this occurs in some CF when it is finished because of air bubbles. Due to these issues I am deeply discounting this one. NOTE: The tip is not as bad as it looks in the first two pics there is a reflection making it hard to see. See the last two pics.
SOLD
Specs:
440C stainless steel, RC57-59, .090 thick
2 1/2 in, hand rubbed blade, 6 in. overall length, full tang
black carbon fiber handles with red and white liners
3/16 hand made mosaic pins, ss thong hole liner, red lanyard with medal beads
Last edited:
