some of my creations

[PMLKnives]

First up I have a piece from 1/8" cpmS30v. 51/4"overall21/8"cutting edge. Carbon fiber, milled slot, tumbled all around, and a kydex sheath. ++SOLD++ delivered to the lower US

This one is one of my favorites 1/8" CPM3V 2 1/4" cutting edge 5" overall with horse stall mat and kydex sheath. +SOLD+ delivered lower us.

Next inline is some sandvik 13c26, 1/8" stock 2 3/4" cutting edge 63/4"overall, one black canvas micarta one green. Both have a utility end and stainless pins with a kydex sheath. $155.00

Lastly is a design I am really digging. Even though it's only a little different from my others. CPMS30V 1/8" stock 2.5" cutting edge 6.5" overall. Black g-10, mill work, thumb checkering and stainless pins with a kydex sheath and belt loop. ++SOLD+++delivered lower US.

thanks for looking!
Paul

 

[grunt soldier]

just a heads up you forgot to put a price on the middle ones


i really am digging your last knife. that is sexy

 

[neuron]

Another quick heads-up/question: is the steel on the first one (with CF scales) CPM 3V or CPM S30V? Your description says 3V, but the blade is marked CPM S30V.

In any case, very nice work! I'm really liking that last design, too. :thumbup:

 

[PMLKnives]

just a heads up you forgot to put a price on the middle ones you forgot your price.


i really am digging your last knife. that is sexy

Another quick heads-up/question: is the steel on the first one (with CF scales) CPM 3V or CPM S30V? Your description says 3V, but the blade is marked CPM S30V.

In any case, very nice work! I'm really liking that last design, too. :thumbup:

Boy you guys don't miss a thing. The first is etched correct and the second knife with the horse stall mat is the CPM3V. Thanks for the heads up.
Paul

 

[Falcor]

Paul, I like your designs - would you mind providing some HT info, e.g. HT by BOS or Peters or Paul?

Thanks

 

[SSonnentag]

I really like that second small one, the 1/8" CPM3V 2 1/4" cutting edge 5" overall with horse stall mat and kydex sheath. I'll take it.

 

[Mitchell Knives]

Very nice work.

 

[PMLKnives]

Paul, I like your designs - would you mind providing some HT info, e.g. HT by BOS or Peters or Paul?

Thanks

Sure, be glad to. It's done by me. I go by the crucible data sheets. Here's the step by step for S30V. First I wrap the knife to be heat treated in the stainless tool wrap. Then into a cold oven and heat to 1500* Fahrenheit and equalize then ramp to 1950 hold for 45 min, next into the aluminum plates. After cooled to room temp snap temper then into liquid nitro for 2 hours. After that I'll temper 3x for 2hrs each at 600*
anything else please feel free to ask
Paul

 

[PMLKnives]

thanks alot guys I'll keep trying

 

[milesofalaska]

Always nice to see what others are making. Nice designs- good prices.

 

[PMLKnives]

thank you, kind sir
Paul