Some of my EDC's

[Bob Ohlemann]

Alright guys, I have not put much up for sale here because most of my sales are custom orders. Since I had my first show last month in Arkansas, I put together some knives for my table. They were very well received but, only generated more custom orders. These are from my EDC line which I started right here on Blade Forums by asking everyone what they though of several sketches and ideas. I even gave one away to a lucky BF member. All the EDC's have the same basic handle shape, overall length of 7.125" and a blade length of 3.125". Blade thickness off the surface grinder averages right around .140". All are made of CPM-S35VN and are HT'ed in house by me and cryoed and tempered to Hrc 59-60. The bolsters are 416 stainless and all scales are attached with G/flex epoxy and pins. I should mention that I spent a lot of time working on this handle shape so this relatively small knife will feel comfortable in most hand sizes. At the Little Rock show I asked everyone who came by my table to pick these up and tell me what they thought of the handle feel; even some very big guys thought they were quite comfortable.

There is a photo below of all currently available sheaths for these knives. If you purchase a knife, you may select any sheath from the photo on a first come, first served basis. The only exception is the Warncliffe; its' sheath is the rough-out lined on the far right. All my sheaths are made by Jack Andress and are top quality!

If you want one of these knives, say "I'll take the _______" in the thread or send me a PM or email at ohlemannr@Hotmail.com.

I prefer Paypal. Prices include domestic priority shipping and insurance.

I warrantee all my knives against defects in materials and workmanship for life.

Thanks, Bob

First one is a tanto grind with a swedge. Scales are black paper micarta. $300

Untitled by Ranger_Bob, on Flickr

SOLD Next is a warncliffe with a swedge. This one has dovetailed bolsters with Australian Ringed Gidgee and black G10 liners. $320 SOLD

Untitled by Ranger_Bob, on Flickr

Untitled by Ranger_Bob, on Flickr

This is a clip point with a swedge. Scales are African Blackwood with green G10 liners. $300 Just want to point out that there is a small natural void in the top edge of the scale just behind the bolster; it can be clearly seen in the second photo.

Untitled by Ranger_Bob, on Flickr

Untitled by Ranger_Bob, on Flickr

Last EDC is a tanto grind with a swedge. Scales are OD canvas micarta. $280

Untitled by Ranger_Bob, on Flickr

Choice of sheaths. All sheaths are made to fit all EDC's except the warncliffe as mentioned above. The two horizontal carry sheaths are ambidextrous and work as cross-draw or horizontal. All other sheaths are right hand but, if you need a left hand carry let me know and I will get it made (add two weeks to delivery time).

Untitled by Ranger_Bob, on Flickr

 

[snowwolf]

All nice knives - But that warn looks awesome.

 

[Bob Ohlemann]

All nice knives - But that warn looks awesome.

Hey thanks! It was definitely the most picked up knife on my table at the show last month. I actually had a chance to sell it before the show but didn't want to let it go so, the guy just ordered one to his specs.

Bob

 

[wdtorque]

I'll take the Wharncliffe.
Dozier
Accuracy beats speed

 

[Bob Ohlemann]

I'll take the Wharncliffe.
Dozier
Accuracy beats speed

It's yours, thanks.

Bob