- Joined
- Apr 13, 2017
- Messages
- 2,062
Hey there everybody! Here’s a new handy little knife I just finished up. Hope you like it!
Steel is .145” x 1 1/4”in O1 with HT at 60/61. Hand sanded to 600 grit for a refined satin finish. It has a lightly tapered tang and the edge was about .010” before sharpening , it balances between the front pins.
Dimensions: 7 3/4” OAL, Tip to Scales 3 1/2”
Leopardwood set off with green and white fiber accents make up the handle, with stainless hardware +mosaic pin. The handle is finished to 1200 grit, oiled and waxed.
The handle feels great in my average sized hand. The blade is nice and snug in the sheath.
Asking $165 $145 to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.
Thanks so much for looking and please feel free to ask anything here or via PM.
John Cahoon
Steel is .145” x 1 1/4”in O1 with HT at 60/61. Hand sanded to 600 grit for a refined satin finish. It has a lightly tapered tang and the edge was about .010” before sharpening , it balances between the front pins.
Dimensions: 7 3/4” OAL, Tip to Scales 3 1/2”
Leopardwood set off with green and white fiber accents make up the handle, with stainless hardware +mosaic pin. The handle is finished to 1200 grit, oiled and waxed.
The handle feels great in my average sized hand. The blade is nice and snug in the sheath.
Asking $
Thanks so much for looking and please feel free to ask anything here or via PM.
John Cahoon
