- Joined
- Apr 13, 2017
- Messages
- 2,179
Greetings knifeknuts! Here’s a new Patch Knife style for your consideration.
Steel is 1/8” x 1 1/4” in NitroV with professional HT at 60/61. Hand sanded to P1200 grit for a satin finish. The edge was about .010” before sharpening.
Dimensions: 8 3/8” OAL, Tip to bolster at just over 4 3/16”
The bolster is copper and steel, polished to 2000 grit and buffed. The handle is Elk and Leopardwood with G10 spacers and a just proud stainless pin. It’s sanded to 1200 grit, oiled waxed and buffed. The pommel is crushed opalite/clear epoxy applied to the dished out pith.
The sheath is hand made by me and the tie down isn’t as tight as usual, it retains but if you are somersaulting down a hill it could release. I’ve reduced the price from previous ones to reflect this.
Asking only $165 to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.
Thanks so much for looking and please feel free to ask anything here or via PM.
John Cahoon
Steel is 1/8” x 1 1/4” in NitroV with professional HT at 60/61. Hand sanded to P1200 grit for a satin finish. The edge was about .010” before sharpening.
Dimensions: 8 3/8” OAL, Tip to bolster at just over 4 3/16”
The bolster is copper and steel, polished to 2000 grit and buffed. The handle is Elk and Leopardwood with G10 spacers and a just proud stainless pin. It’s sanded to 1200 grit, oiled waxed and buffed. The pommel is crushed opalite/clear epoxy applied to the dished out pith.
The sheath is hand made by me and the tie down isn’t as tight as usual, it retains but if you are somersaulting down a hill it could release. I’ve reduced the price from previous ones to reflect this.
Asking only $165 to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.
Thanks so much for looking and please feel free to ask anything here or via PM.
John Cahoon
