- Joined
- Nov 14, 2014
- Messages
- 803
HEAdesigns EQ V2 - In very good overall condition. Solid lockup with no play in any direction. Looks centered to my eye. Sharp factory edge. Some snail trails on the titanium bolsters. Comes with the original box and all the extras that normally come with a HEA knife. These are going for $319.99, I’m asking $250. PICS HERE
***SOLD***ZT 0350 Blem - In good overall condition. Has been professionally resharpened and now has a nice sharp edge. Has some all around wear as it has been used but not abused. Solid lockup with no play in any direction. Looks like the blade slightly favors the clip side. Good action with the Speed Safe assistance. Asking $48. PICS HERE ***SOLD***
Two Sun TS81 & Gerber Flatiron – The TS81 is in good overall condition. D2 steel with titanium handles and bone inlays, runs on ceramic ball bearings. Original factory edge which is still decently sharp. Great action, not fall shutty but could be adjusted to be so, I just have it adjusted to my preferences. I have opened it up, cleaned it out, and added some KPL. Original owner sanded down the bone on the clip side a little bit so it wouldn't be so rough and tear up your pocket. Comes with original box. The Flatiron is not in the best condition. I stripped the middle screw as pictured. The G10 scale is stained. I tried and tried to center it with a decent action but failed, it’s a one hand opener but barely, and it favors the show side. Factory edge. No box with the Flatiron. Get them both for $60. PICS HERE & HERE
***SOLD***Spyderco Endura & Ontario Rat 2 & Cold Steel Large Voyager - Both the Rat and Endura are in user condition. Each has some side to side blade play. The lockup on the Rat is about 100% as pictured. Both have been sharpened. Good action on both. Both have been well carried and show it. No box for either. Made in Japan Cold Steel Large Voyager has been USED. It does have a fresh edge that was put on by a professional sharping service, so it's sharp and ready to go. The centering really favors the clip side. There is some side to side play as well as a little vertical play. What you see is what you get. Get all three for $50. PICS HERE & HERE ***SOLD***
CRKT Ruger Incendiary & CRKT M-16 – I’m the original owner of both. The CRKT M-16 is in good overall condition. Factory edge. I have disassembled it, cleaned it, and used some KPL for the action. It was lightly used and does have a few marks on the blade. Slight side to side play that could probably be adjusted out, I just have it adjusted to me preferences. The Incendiary has also been used but certainly not abused as it’s in good overall condition. Good action with a solid lockup and no play in any direction. Factory edge that’s still pretty sharp. Get them both for $62. PICS HERE & HERE
Prices include USPS Priority shipping and all PayPal fees. I always appreciate being able to save on the fees but please pay whichever way you're most comfortable. As far as trades go I'm not looking for anything specific so offer up what you got! All offers will receive a prompt and polite response. First "I'll take it" in the comments followed by a prompt PM and payment gets them. if you have any questions feel free to PM here or email me huck@huckleberryreviews.com thanks!
***SOLD***ZT 0350 Blem - In good overall condition. Has been professionally resharpened and now has a nice sharp edge. Has some all around wear as it has been used but not abused. Solid lockup with no play in any direction. Looks like the blade slightly favors the clip side. Good action with the Speed Safe assistance. Asking $48. PICS HERE ***SOLD***
Two Sun TS81 & Gerber Flatiron – The TS81 is in good overall condition. D2 steel with titanium handles and bone inlays, runs on ceramic ball bearings. Original factory edge which is still decently sharp. Great action, not fall shutty but could be adjusted to be so, I just have it adjusted to my preferences. I have opened it up, cleaned it out, and added some KPL. Original owner sanded down the bone on the clip side a little bit so it wouldn't be so rough and tear up your pocket. Comes with original box. The Flatiron is not in the best condition. I stripped the middle screw as pictured. The G10 scale is stained. I tried and tried to center it with a decent action but failed, it’s a one hand opener but barely, and it favors the show side. Factory edge. No box with the Flatiron. Get them both for $60. PICS HERE & HERE
***SOLD***Spyderco Endura & Ontario Rat 2 & Cold Steel Large Voyager - Both the Rat and Endura are in user condition. Each has some side to side blade play. The lockup on the Rat is about 100% as pictured. Both have been sharpened. Good action on both. Both have been well carried and show it. No box for either. Made in Japan Cold Steel Large Voyager has been USED. It does have a fresh edge that was put on by a professional sharping service, so it's sharp and ready to go. The centering really favors the clip side. There is some side to side play as well as a little vertical play. What you see is what you get. Get all three for $50. PICS HERE & HERE ***SOLD***
CRKT Ruger Incendiary & CRKT M-16 – I’m the original owner of both. The CRKT M-16 is in good overall condition. Factory edge. I have disassembled it, cleaned it, and used some KPL for the action. It was lightly used and does have a few marks on the blade. Slight side to side play that could probably be adjusted out, I just have it adjusted to me preferences. The Incendiary has also been used but certainly not abused as it’s in good overall condition. Good action with a solid lockup and no play in any direction. Factory edge that’s still pretty sharp. Get them both for $62. PICS HERE & HERE
Prices include USPS Priority shipping and all PayPal fees. I always appreciate being able to save on the fees but please pay whichever way you're most comfortable. As far as trades go I'm not looking for anything specific so offer up what you got! All offers will receive a prompt and polite response. First "I'll take it" in the comments followed by a prompt PM and payment gets them. if you have any questions feel free to PM here or email me huck@huckleberryreviews.com thanks!
Last edited:
