- Joined
- Jan 24, 2012
- Messages
- 1,442
I am feeling the need to clean out some of the knives that I don't carry (and recover some cash; doggone taxes!).
All of the normal stuff applies here; know your local laws regarding knife possesion, etc.
All prices are PayPal G&S and shipping included, except for the really inexpensive knives (on which I will waive the shipping fee ($5.00) if it is purchased with a knife that is "shipping included". If you feel that any price is out of line, please let me know via PM or email (scottabrandeberry at gmail dot com) (please don't clog the thread); lowball offers will be politely ignored.
If you need to see pics, I can email them once they are taken, but it may be a while, as I don't have many pics of my collection (do need to change that for insurance purposes if nothing else).
Anyway, here goes, grouped by manufacturer:
Benchmade
300-1 Ball Axis Flipper with Blue/Black G10 - Asking $150.00 - This one is BNIB. Bought it for my wife as an excuse to check it out, but it is too small for my size large hands (love larger knives as well), and she doesn't want to carry it either. Flipped a couple of times, never cut or carried.
710D2 McHenry & Williams - Asking $110.00 SOLD - This one is a very light user, purchase as such, and only pocketed a couple of times by me, don't remember cutting anything more than paper. I think it has the factory edge, but I will have to take a look at it to be sure.
730S Ares Elishewitz serrated 154CM with Marroon/Black layered G10 - Asking $100.00 - This one is a user (purchased it as such several years back) with a hand-convexed edge. It's certainly not a safe queen, but it is a fairly scarce model with a lot of life left in it. See pics below
Spyderco
C172CFTIP Domino CF CTS-XHP - Asking $195.00 - This one is BNIB. Again, bought it for my wife as an excuse to check it out, but it is too small for my size large hands (love larger knives as well), and she doesn't want to carry it either. Flipped a couple of times, never cut or carried.
Kershaw
1450 Saphire Blue Ti - Asking $45.00 - This one is a light user and a duplicate in my collection (the other one is a light user as well). Mostly factory edge, may have been lightly touched up. Light scratches on the Ti, nothing deep, normal carry wear.
1500ST Mini Task serrated blem - Asking $80.00 - This one has seen very little use/carry time. Factory edge has been stropped. Handle has been drilled and tapped for tip-up carry (clip currently in that position).
1550 Blackout - Asking $50.00 - Picked this one up at a gun shop years ago on a business trip, paid too much ($70.00), and wound up carrying it once, and cut very little with it, if anything.
1570 Avalanche S440V/S60V blem - Asking $100.00 - This is one that I originally purchased to convert to tip-up and put into the EDC rotation, but never got to it, and then they got scarce, so it has been sitting unused in my collection. It has been fondled, but never cut or carried.
1635TCKTST Mini Cyclone Tanto serrated DLC blem - Asking $80.00 - This one is unused and uncarried. Just had to have it when the plan was to obtain all of the versions of the Cyclone (too many other knives that I want).
1640 Vapor (small version) - Asking $20.00 plus shipping (unless purchased with another knife with shipping included). - This one has seen light use, mostly factory edge, has been drilled and tapped for tip-up carry. This is the original AUS8 version.
1650 Vapor II (large version) - Asking $20.00 plus shipping (unless purchased with another knife with shipping included). - This one has seen light use, mostly factory edge, has been drilled and tapped for tip-up carry. This is the original AUS8 version.
1670BLKTSX Blur Cabela's exclusive tiger stripe DLC - Asking $75.00 - This one is brand new in the sealed hang card.
1670S30V Blur - Asking $55.00 SOLD - This one is a light user with the intact torsion bar (and a duplicate in my collection).
1750 Lahar - Asking $65.00 - This one is LNIB, not BNIB only because it may have been in my pocket a couple of times, but I don't think that it ever cut anything (even paper). Another duplicate in my collection.
1780CB Rake - Asking 50.00 - This one is a light user. I did a acid etch to darken the D2. There is a couple of scratches on the blade. This is another one that is just smaller than I like (actually too medium; too small to be big and too big to be small, lol!).
Again, please PM or email (scottabrandeberry at gmail dot com) with questions.
Thanks for looking!
All of the normal stuff applies here; know your local laws regarding knife possesion, etc.
All prices are PayPal G&S and shipping included, except for the really inexpensive knives (on which I will waive the shipping fee ($5.00) if it is purchased with a knife that is "shipping included". If you feel that any price is out of line, please let me know via PM or email (scottabrandeberry at gmail dot com) (please don't clog the thread); lowball offers will be politely ignored.
If you need to see pics, I can email them once they are taken, but it may be a while, as I don't have many pics of my collection (do need to change that for insurance purposes if nothing else).
Anyway, here goes, grouped by manufacturer:
Benchmade
300-1 Ball Axis Flipper with Blue/Black G10 - Asking $150.00 - This one is BNIB. Bought it for my wife as an excuse to check it out, but it is too small for my size large hands (love larger knives as well), and she doesn't want to carry it either. Flipped a couple of times, never cut or carried.
710D2 McHenry & Williams - Asking $110.00 SOLD - This one is a very light user, purchase as such, and only pocketed a couple of times by me, don't remember cutting anything more than paper. I think it has the factory edge, but I will have to take a look at it to be sure.
730S Ares Elishewitz serrated 154CM with Marroon/Black layered G10 - Asking $100.00 - This one is a user (purchased it as such several years back) with a hand-convexed edge. It's certainly not a safe queen, but it is a fairly scarce model with a lot of life left in it. See pics below
Spyderco
C172CFTIP Domino CF CTS-XHP - Asking $195.00 - This one is BNIB. Again, bought it for my wife as an excuse to check it out, but it is too small for my size large hands (love larger knives as well), and she doesn't want to carry it either. Flipped a couple of times, never cut or carried.
Kershaw
1450 Saphire Blue Ti - Asking $45.00 - This one is a light user and a duplicate in my collection (the other one is a light user as well). Mostly factory edge, may have been lightly touched up. Light scratches on the Ti, nothing deep, normal carry wear.
1500ST Mini Task serrated blem - Asking $80.00 - This one has seen very little use/carry time. Factory edge has been stropped. Handle has been drilled and tapped for tip-up carry (clip currently in that position).
1550 Blackout - Asking $50.00 - Picked this one up at a gun shop years ago on a business trip, paid too much ($70.00), and wound up carrying it once, and cut very little with it, if anything.
1570 Avalanche S440V/S60V blem - Asking $100.00 - This is one that I originally purchased to convert to tip-up and put into the EDC rotation, but never got to it, and then they got scarce, so it has been sitting unused in my collection. It has been fondled, but never cut or carried.
1635TCKTST Mini Cyclone Tanto serrated DLC blem - Asking $80.00 - This one is unused and uncarried. Just had to have it when the plan was to obtain all of the versions of the Cyclone (too many other knives that I want).
1640 Vapor (small version) - Asking $20.00 plus shipping (unless purchased with another knife with shipping included). - This one has seen light use, mostly factory edge, has been drilled and tapped for tip-up carry. This is the original AUS8 version.
1650 Vapor II (large version) - Asking $20.00 plus shipping (unless purchased with another knife with shipping included). - This one has seen light use, mostly factory edge, has been drilled and tapped for tip-up carry. This is the original AUS8 version.
1670BLKTSX Blur Cabela's exclusive tiger stripe DLC - Asking $75.00 - This one is brand new in the sealed hang card.
1670S30V Blur - Asking $55.00 SOLD - This one is a light user with the intact torsion bar (and a duplicate in my collection).
1750 Lahar - Asking $65.00 - This one is LNIB, not BNIB only because it may have been in my pocket a couple of times, but I don't think that it ever cut anything (even paper). Another duplicate in my collection.
1780CB Rake - Asking 50.00 - This one is a light user. I did a acid etch to darken the D2. There is a couple of scratches on the blade. This is another one that is just smaller than I like (actually too medium; too small to be big and too big to be small, lol!).
Again, please PM or email (scottabrandeberry at gmail dot com) with questions.
Thanks for looking!
Last edited:
