- Joined
- Jul 12, 2004
- Messages
- 570
All prices include shipping in the US and all PayPal fees. Thanks for looking.
PICS HERE
Spyderco C11PFGD4 Limited Edition Delica 4 with 2.875" VG10 Damascus Plain Blade and Foliage Green FRN Handles
This is a limted edition Delica with a VG-10 blade flanked by two pieces of 15-layer Damascus steel and foliage green FRN scales. These were only available for a very short time and are long gone. I carried this one a bit and while everything looks good as new to me it did come with a small mark in the blade coating on one side. Comes with the original box and papers.
$95
---
SOLDBenchmade 707-1701 Limited Edition Shot Show Sequel with 2.95" S30V Blade and Blue Aluminum Scales
This is the last version of the McHenry & Williams designed Sequel to be produced and was made for Shot Show 2017. These were only available for a very short time and are long gone. This one is #617 out of 1,000 and is in like-new condition. I'm dinging it half a point because the parkerized pocket clip came out of the box looking a little scratched up like they all do. Comes with the original box and bag.
$200SOLD
---
Emerson Mini CQC-7BW Po Boy with 2.9" 154CM Blade, Titanium Bolsters, and Natural Micarta Scales
This Po Boy mod was done by Andrew Charlet (fastlt1nos) and features bead blasted titanium bolsters, liners and backspacer with radiused natural micarta scales. The titanium is a bit scratched up as is the blade and the blade was reground at some point as well. The action is almost too slick as the detent is very weak but lockup is solid and smooth. It's a beautiful piece and a blade swap would make it perfect but I'm letting it go because I decided to do a mod on a CQC-7AW with green micarta instead. According to the last owner the mods alone cost $190 on this knife. Does not include a box or any leftover original parts.
$185
---
SOLDVictorinox Pioneer Harvester (53953) Silver Alox 93mm
Discontinued model with pruning blade instead of can opener. Never carried. Factory edge. Includes original box.
$30.00SOLD
---
Wenger Cigar 79 (16881) Red Evo Swiss Army Knife With Cigar Cutter 85mm
Never carried. Some minor scratches on the scales from box rubbing. Factory edge. Includes original box. This version includes scissors.
$40.00
---
Boker Plus Tech-Tool Outdoor 6 Multifunction Knife with Sandvik 12C27 Blade and Green G10 Handles
Never carried. This knife inlcudes a 2 4/5" main blade, glass breaker, reversible pocket clip for tip-up or tip-down carry, small serrated blade, large and small flathead screwdrivers, bottle opener, wire stripper, corkscrew, and lanyard ring that can be folded away into the handle. Comes with original box.
$35
PICS HERE
Spyderco C11PFGD4 Limited Edition Delica 4 with 2.875" VG10 Damascus Plain Blade and Foliage Green FRN Handles
This is a limted edition Delica with a VG-10 blade flanked by two pieces of 15-layer Damascus steel and foliage green FRN scales. These were only available for a very short time and are long gone. I carried this one a bit and while everything looks good as new to me it did come with a small mark in the blade coating on one side. Comes with the original box and papers.
$95
---
SOLDBenchmade 707-1701 Limited Edition Shot Show Sequel with 2.95" S30V Blade and Blue Aluminum Scales
This is the last version of the McHenry & Williams designed Sequel to be produced and was made for Shot Show 2017. These were only available for a very short time and are long gone. This one is #617 out of 1,000 and is in like-new condition. I'm dinging it half a point because the parkerized pocket clip came out of the box looking a little scratched up like they all do. Comes with the original box and bag.
$200SOLD
---
Emerson Mini CQC-7BW Po Boy with 2.9" 154CM Blade, Titanium Bolsters, and Natural Micarta Scales
This Po Boy mod was done by Andrew Charlet (fastlt1nos) and features bead blasted titanium bolsters, liners and backspacer with radiused natural micarta scales. The titanium is a bit scratched up as is the blade and the blade was reground at some point as well. The action is almost too slick as the detent is very weak but lockup is solid and smooth. It's a beautiful piece and a blade swap would make it perfect but I'm letting it go because I decided to do a mod on a CQC-7AW with green micarta instead. According to the last owner the mods alone cost $190 on this knife. Does not include a box or any leftover original parts.
$185
---
SOLDVictorinox Pioneer Harvester (53953) Silver Alox 93mm
Discontinued model with pruning blade instead of can opener. Never carried. Factory edge. Includes original box.
$30.00SOLD
---
Wenger Cigar 79 (16881) Red Evo Swiss Army Knife With Cigar Cutter 85mm
Never carried. Some minor scratches on the scales from box rubbing. Factory edge. Includes original box. This version includes scissors.
$40.00
---
Boker Plus Tech-Tool Outdoor 6 Multifunction Knife with Sandvik 12C27 Blade and Green G10 Handles
Never carried. This knife inlcudes a 2 4/5" main blade, glass breaker, reversible pocket clip for tip-up or tip-down carry, small serrated blade, large and small flathead screwdrivers, bottle opener, wire stripper, corkscrew, and lanyard ring that can be folded away into the handle. Comes with original box.
$35
Last edited:
