Purchased a couple custom fixed blades I really like and I am not using any of these anymore. US sales only please and the price includes shipping and paypal fees. Paypal is preferred but I will also accept a USPS MO shipped in a timely manner. Please know your local laws about owning these knives, some are on the larger side, you must be 18 years old or older to purchase. Only trades I would be interested in at this time are a Spyderco Techno, an original police variant(no police 3), a recent Starmate or knives in super steels, especially 3v or k390.
Spyderco Hossom Forager, used condition, I am the second owner, knife HAS been sharpened and used by the previous owner, use looks minimal, still in excellent shape with minor scratching on the blade. This was one of my backups, this is a very big, heavy knife. Sheath included with g-clip, NO BOX. SOLD to La Knife Lover Price was $150
Specs from Spyderco:
length overall 14" (356mm) blade length 7.5" (190mm) blade steel N690CO
length closed () cutting edge 7.5" (190mm) weight 14.7oz (417g)
blade thickness .188" (5mm) handle material MICARTA
Spyderco 52100 mule team with handles and IWB/OWB sheath made by me, fit and finish is good, not perfect, sheath tension is excellent but there is a little rattle, knife will not fall out even when inverted. Knife has been used, carried, and sharpened and has some patina starting as well as scratches on the blade from use and the kydex. No box or papers. SOLD Steal for a Mule with handles and kydex.
Landi MPX custom, Used, has scratches from sharpening, kydex and use. Comes with a kydex sheath that fits much better than John's that's set up for a large Tek-Lok, NO tek-lok included, I am out of them. This is a steal for this knife, cost well over double that from John and its as low as I will go. SOLD to morestag, price was $80.00
Specs from John-Steel: 1095 - Professionally hardened to Rc 58-59, triple tempered, and Cryogenically treated to Negative 300 Celsius.
Handles - black canvas Micarta
Grind: Full Flat from Spine to edge
OAL at 11 1/4, cutting edge at 5 1/4, 6 inches from scales to tip. Cut out of 3/16 stock
Benchmade BM12500 fixed blade Osbourne design in 440c, this has been used and sharpened, there is some slight marring on the alum butt and the knife HAS been apart. There is a very slight wiggle if you hold the handle firmly and wiggle the blade. Sheath was modified(shortened on the front) as it was catching while being carried hiking. SOLD to DonCipcio, price was $60.00
Lastly an Esee Izula and sheath, knife has been under the seat in my truck for years, its seen very little use. Main use was cutting up cardboard boxes and that smoothed out the coating, I am the second owner and the handle is cord wrapped. SOLD to morestag price was $40.00
Pictures did not stay on the camera memory card for some reason, knife is black blade with tan paracord wrapped handle. Lots of coating smoothing from thick cardboard. I will take more photos and load them in a little bit...
Spyderco Hossom Forager, used condition, I am the second owner, knife HAS been sharpened and used by the previous owner, use looks minimal, still in excellent shape with minor scratching on the blade. This was one of my backups, this is a very big, heavy knife. Sheath included with g-clip, NO BOX. SOLD to La Knife Lover Price was $150
Specs from Spyderco:
length overall 14" (356mm) blade length 7.5" (190mm) blade steel N690CO
length closed () cutting edge 7.5" (190mm) weight 14.7oz (417g)
blade thickness .188" (5mm) handle material MICARTA
Spyderco 52100 mule team with handles and IWB/OWB sheath made by me, fit and finish is good, not perfect, sheath tension is excellent but there is a little rattle, knife will not fall out even when inverted. Knife has been used, carried, and sharpened and has some patina starting as well as scratches on the blade from use and the kydex. No box or papers. SOLD Steal for a Mule with handles and kydex.
Landi MPX custom, Used, has scratches from sharpening, kydex and use. Comes with a kydex sheath that fits much better than John's that's set up for a large Tek-Lok, NO tek-lok included, I am out of them. This is a steal for this knife, cost well over double that from John and its as low as I will go. SOLD to morestag, price was $80.00
Specs from John-Steel: 1095 - Professionally hardened to Rc 58-59, triple tempered, and Cryogenically treated to Negative 300 Celsius.
Handles - black canvas Micarta
Grind: Full Flat from Spine to edge
OAL at 11 1/4, cutting edge at 5 1/4, 6 inches from scales to tip. Cut out of 3/16 stock
Benchmade BM12500 fixed blade Osbourne design in 440c, this has been used and sharpened, there is some slight marring on the alum butt and the knife HAS been apart. There is a very slight wiggle if you hold the handle firmly and wiggle the blade. Sheath was modified(shortened on the front) as it was catching while being carried hiking. SOLD to DonCipcio, price was $60.00
Lastly an Esee Izula and sheath, knife has been under the seat in my truck for years, its seen very little use. Main use was cutting up cardboard boxes and that smoothed out the coating, I am the second owner and the handle is cord wrapped. SOLD to morestag price was $40.00
Pictures did not stay on the camera memory card for some reason, knife is black blade with tan paracord wrapped handle. Lots of coating smoothing from thick cardboard. I will take more photos and load them in a little bit...
Last edited:
