Spyderco JD Smith for trade

StuntDouble

Gold Member
Feedback: +22 / =0 / -0
Joined
Apr 26, 2004
Messages
2,447
I'm putting up a Spyderco PE JD Smith up for trade. ATS-34 blade,and micarta handle with a single steel liner. It's been carried more than it's actually been used. There are some scuffs and scratches on the handle, but nothing serious. Mainly the sort of thing you'd find on a knife that has seen some pocket time. There are also a couple of light scratches on the blade itself. The pocket clip is in surprisingly good condition. There are a couple of scratches on it, and there are a couple of small areas where the paint is missing. The Gold Spyder on the clip is immaculatte though. There are some scratches on the tang from where I used a sharpening stone to try and smooth off the area right below the edge of the blade. There are some scratches along the backspring of the knife as well.

Also, right after I bought this knife, I sent it off to Spyderco for a resharpening, as I was not happy with the edge out of the box. It came back nice and sharp, and since then has only seen light use, mainly kitchen use. I did polish the edge to the best of my ability, just to get what I'm guessing were buffing marks, out. The tip is still needle sharp.

The only other thing I can think of is that butt of the knife is ground at an angle. In other words, if you hold the knife so the blade is pointing down, the butt end has an angle to it. Nothing that would affect use though.

Things I'm interested in trading for:
New or Used
Schrade knives (preferably in carbon steel)
Case (especially a CV wharncliffe)
Spydercos (anything except a Delica :p )
Benchmades

If you have something other than those brands that you think I might be interested in, feel free to send a message.

It's easiest to reach me at


TRADE PENDING
 
Last edited:
Back
Top