- Joined
- Apr 3, 2011
- Messages
- 5,811
hey guys! I have this Jess Horn for sale as a "blem". During a regrind it got a scuff on the flat (non show side) from me not watching what I was doing as carefully as I needed to! Unfortunately the blade cannot be removed due to the pinned construction or I would have just refinished the flats. Anyway, this has a nice thin edge at about .010" thick at 15 dps. This should be used as a lighter edc, for slicing work, or defense. The tip, due to the construction can't take a lot of lateral load so no prying, but the tip is needle sharp and the edge is like a razor blade!
Solid lock up, both vertically and horizontally. Closed it favors the show slide slightly. I am not making any $ on my work here, so you will get the regrind to 220 grit for free. This is just to recouperate the cost of a replacement knife for my customer. Asking SOLD net to me which includes shipping tyd in the US. Thanks!
Solid lock up, both vertically and horizontally. Closed it favors the show slide slightly. I am not making any $ on my work here, so you will get the regrind to 220 grit for free. This is just to recouperate the cost of a replacement knife for my customer. Asking SOLD net to me which includes shipping tyd in the US. Thanks!
Last edited:
