Spyderco, Kershaw Shallot s110v/pair, ZT, Strider, Benchmade...

drichardson67

drichardson67

Feedback: +25 / =0 / -0
Joined
May 13, 2012
Messages
299
Hello everyone. Time to clean out the safe a bit. I'll be listing a bunch here, so stay tuned.

Fine print first: PP preferred. I'll cover PP fees, shipping, insurance, D/C. PM me with any questions. And thanks for your interest.

Trade possibilities: Low serial # ZTs (below 200-250 or so) and High End Kershaws. I like Exotic Steels in general. Looking for a ZT 0500 MUDD in particular. Basically, I like lots of knives.

First up: a brand new Spyderco Southard. It is still in it's plastic wrap from the factory. Total cost to you is 200. This one is sold.

DSCN0673.jpg

DSCN0674.jpg

Next up a slightly used Spyderco Chinook. No box, but I do have a generic box that I'll include. I just finished sharpening it at a 42 degree bevel on my WE. Really sharp. Blade is centered, lockup is tight. Slight wearing on edge of clip and opposing scale. s30v steel. 210 >>>200 to your door.

DSCN1121.jpg

DSCN1122.jpg

More pics and knives to come... Maybe just keep your replies to PM's until I get them all listed. Thanks
 
Last edited:
NIB Kershaw Shallot s110v pair. They are both perfect specimens, except for the partially serrated version: the blade is pulled every so slightly to the right--about half a gnat's ass hair. Lockup on both is tight at about 30%. I'd like to sell as a pair if possible. They've basically been together since they were born. But will split if need be. Everything from the factory is included. 525>>>515 for the pair. Or 295>>>285 for the plain edge, 260>>> 250 for the serrated.

DSCN1123.jpg

DSCN1124.jpg

DSCN1127.jpg

More knives to come...
 
Last edited:
Next up a few ZTs:

0350cb. Used, but in pretty good shape. Elmax steel. Last owner kind of went to work on the edge. If I remember right, it might be convexed, but it's been a long time, so my rememberer might be askew. Serial # 0723. Blade is centered, lockup is tight at about 55%. I don't have the original box, but I've another ZT box that I could include. 130 to your door.

0561: NIB. A perfect specimen. Centered. Lockup is tight at 40%. Serial # 3350. Elmax. 185 to your door. SOLD.

0560: Used, but only barely. Really just to sharpen it. I put a 'wicked edge' on this one, mirror polished at 39%. Dang, but Elmax takes a nice edge. I can't find the box for this one, or the original scale--yet. I'll keep looking. Blade is centered. There is the tiniest bit of lock rock if you really lean on it. Otherwise not noticeable. Lockup at about 55%. I can't remember where the custom scale is from. Price is for knife as shown. I'll amend the price if I can find the other scale. Serial # 3376. Elmax. 165 to your door.



DSCN1137.jpg

DSCN1138.jpg

DSCN1140.jpg

More to come...
 
Last edited:
Strider SnG CC Z Wear, Coyote Brown. Brand New, but has been Frog Lubed. It's an older pic, but it's basically right in the middle. I torqued an old back injury a few days ago and am having a little difficulty getting around, but when I can make it up the stairs to the safe to retrieve it, I'll post a fresh pic. But it is brand new. 475 to your door.

lotsofknives046_zpsf2aa8969.jpg
[/URL][/IMG]
 
You must log in or register to reply here.
Back
Top