nakedjohnny
Gold Member
- Joined
- Nov 17, 2014
- Messages
- 466
I have an unused Mamba, blade never cut anything and knife never carried,
however today I decided to switch pocket clip, and while unscrewing the middle screw on the clip, the screw broke,
basically half the screw just came out and the other half stuck in the hole
I think Spyderco will take care of this, but I'm not sure, I didn't tamper with it or anything, simple unscrewing this shouldn't happen
nevertheless, it's held tight by the other 2 screws which are fine with no issue
everything else is new and never used, fully functional
SOLD
however today I decided to switch pocket clip, and while unscrewing the middle screw on the clip, the screw broke,
basically half the screw just came out and the other half stuck in the hole
I think Spyderco will take care of this, but I'm not sure, I didn't tamper with it or anything, simple unscrewing this shouldn't happen
nevertheless, it's held tight by the other 2 screws which are fine with no issue
everything else is new and never used, fully functional
SOLD
Last edited: