- Joined
- Sep 3, 2008
- Messages
- 961
Knives will be shipped via USPS flat rate priority. Payment may be made by Paypal +3.5% or USPS money order. Knives will ship today for payments received before 4:00pm PST.
- USA sales only at this time
- Please ask any questions prior to purchase
- All offers should be sent via PM or email
- First "I'll take it" in this thread gets it
- No trades at this time
SPYDERCO FACTORY SECONDS, this means they do not carry the Spyderco warranty, they are fully functional and 2nds due to a blemish or other non-functional flaw. NO BOX & SMALL SECONDS NOTCH ABOVE SPYDERHOLE.
- Spyderco Native 5 Forum Knife S110V: $125.00 SOLD, blade very slightly off center to clip side, edge grind even, opens/closes smoothly, almost undetectable vertical blade play, can not find anything else to cause this to be a second.
- Spyderco Paramilitary 2 S90V/CPM154 Carbon Fiber: $Relisted, blade centered, edge grind even, opens/closes smoothly, lamination line even on both sides. This appears to be a second due to what I would call a factory SLICER grind, the blade is noticeably thinner than a standard Para2, coming in at 2.75mm at the front of the opening hole vs. 3.5mm on a standard Para2.
Native 5 Forum Knife:



Paramilitary (With two other Para2's for comparison):




- USA sales only at this time
- Please ask any questions prior to purchase
- All offers should be sent via PM or email
- First "I'll take it" in this thread gets it
- No trades at this time
SPYDERCO FACTORY SECONDS, this means they do not carry the Spyderco warranty, they are fully functional and 2nds due to a blemish or other non-functional flaw. NO BOX & SMALL SECONDS NOTCH ABOVE SPYDERHOLE.
- Spyderco Native 5 Forum Knife S110V: $125.00 SOLD, blade very slightly off center to clip side, edge grind even, opens/closes smoothly, almost undetectable vertical blade play, can not find anything else to cause this to be a second.
- Spyderco Paramilitary 2 S90V/CPM154 Carbon Fiber: $Relisted, blade centered, edge grind even, opens/closes smoothly, lamination line even on both sides. This appears to be a second due to what I would call a factory SLICER grind, the blade is noticeably thinner than a standard Para2, coming in at 2.75mm at the front of the opening hole vs. 3.5mm on a standard Para2.
Native 5 Forum Knife:



Paramilitary (With two other Para2's for comparison):




Last edited: