BrickForBrains
Gold Member
- Joined
- Mar 3, 2019
- Messages
- 130
First "I'll Take In" in the thread (chronologically) holds priority.
Spyderco S110V PM2 REK Custom - Price Reduced $350 - PayPal G&S - CONUS
The knife is lightly used, centering is near perfect, the blade drops open and shut freely.
Josh at Razor Edge Knives did an incredible job extending the plunge line to maximize the available cutting edge (220 grit blade finish). The hardware (screws), lanyard hole, and spacer are Bronze anodized Titanium from xxxadrenalinxxx (Australia). A titanium blade stop is included but not installed. and the deep carry clip is from MXG Gear (also Bronze Anodized Titanium).
Original box, hardware, and pocket clip are included with purchase. The edges of the G10 show some slight scuffing and the factory stainless lanyard tube was scratched (significantly) during removal, but the knife is otherwise near perfect.
I've invested about $480 into this build, but just haven't found to time to put the knife into my rotation, hoping to free up some cash for a fixed blade.
The first photo was taken at REK and predates the titanium hardware.
Sold - Benchmade Freek 560BK-1 $180 PayPal G&S - CONUS - Sold
First Production 1153/1200 - CPM-M4 w/ Black Cerakote
Lightly used, even grind, factory edge (hasn't been resharpened), perfectly centered, MXG Gear Deep Carry Clip. Includes original box and factory pocket clip.
Light scuffing on blade coating (from cardboard) and on the pocket clip from carrying. The pivot bushings can be a bit stiff (have been breaking in with use) and won't quite fall shut (pivot is at factory tension), a stiff flick will throw the blade shut.
This is my first time selling on the forums and I'm struggling with the file uploads so message me if you'd like additional photos for either of the knives, thanks.
Spyderco S110V PM2 REK Custom - Price Reduced $350 - PayPal G&S - CONUS
The knife is lightly used, centering is near perfect, the blade drops open and shut freely.
Josh at Razor Edge Knives did an incredible job extending the plunge line to maximize the available cutting edge (220 grit blade finish). The hardware (screws), lanyard hole, and spacer are Bronze anodized Titanium from xxxadrenalinxxx (Australia). A titanium blade stop is included but not installed. and the deep carry clip is from MXG Gear (also Bronze Anodized Titanium).
Original box, hardware, and pocket clip are included with purchase. The edges of the G10 show some slight scuffing and the factory stainless lanyard tube was scratched (significantly) during removal, but the knife is otherwise near perfect.
I've invested about $480 into this build, but just haven't found to time to put the knife into my rotation, hoping to free up some cash for a fixed blade.
The first photo was taken at REK and predates the titanium hardware.
Sold - Benchmade Freek 560BK-1 $180 PayPal G&S - CONUS - Sold
First Production 1153/1200 - CPM-M4 w/ Black Cerakote
Lightly used, even grind, factory edge (hasn't been resharpened), perfectly centered, MXG Gear Deep Carry Clip. Includes original box and factory pocket clip.
Light scuffing on blade coating (from cardboard) and on the pocket clip from carrying. The pivot bushings can be a bit stiff (have been breaking in with use) and won't quite fall shut (pivot is at factory tension), a stiff flick will throw the blade shut.
This is my first time selling on the forums and I'm struggling with the file uploads so message me if you'd like additional photos for either of the knives, thanks.
Last edited:
