- Joined
- Feb 9, 2012
- Messages
- 902
I have here a rare Strider SMF in M4 steel. This was an exclusive run by Monkey Edge, and there are no more. This knife is milled aluminum on one side and the titanium on the other. Blade is etched M4 on the ricasso. FULL DISCLOSURE: the knife was used and carried at work and I nicked the edge pretty good. I sent it to Strider and they covered the chip for FREE. Didn't even ask for the shipping. The blade now has a slight recurve to it. I think it looks pretty cool, and I reiterate, Strider did the work and covered it. There is also some scratches around the blade pivot. That happened from carrying the knife and it rubbing something metallic. The knife is functionally 100%. Lock up is good. Not sticky. There were only 500 of these done I think, so you probably won't see many. I just want to be fully upfront about the blade. If you didn't know, it looks like it was built that way. Strider fixed it perfect. Any questions, please ask. New, this knife would easily be $500 +, I want to move it, and because its not new and perfect, I'm asking $SPF. I cover fees and Priority shipping to lower 48. SPF to Ludwig
http://s1275.photobucket.com/user/WGuesman/library/Millie/Strider M4?sort=3&page=1
Next up is a Spyderco Titanium Millie. I have added the steel spacers and upgraded the Torx screws to T8. Not only does it make the knife look fantastic, the T8 Torx are stronger and less likely to strip. I have the original Torx screws and the original box. FULL DISCLOSURE: Since I took the knife apart and replaced the spacers and the Torx screws, the Spyderco warranty is void. Just know that going in. While I have never had an issue with a Spyderco Millie requiring warranty work, you buy this knowing you don't have one. The knife is otherwise clean and very sharp. S30V blade steel. This is my "Bargain Sebenza".
New, these knives are almost $350-$400. My price is $150.00. I cover fees and shipping to lower 48.
http://s1275.photobucket.com/user/WGuesman/library/Millie?sort=3&page=1
http://s1275.photobucket.com/user/WGuesman/library/Millie/Strider M4?sort=3&page=1
Next up is a Spyderco Titanium Millie. I have added the steel spacers and upgraded the Torx screws to T8. Not only does it make the knife look fantastic, the T8 Torx are stronger and less likely to strip. I have the original Torx screws and the original box. FULL DISCLOSURE: Since I took the knife apart and replaced the spacers and the Torx screws, the Spyderco warranty is void. Just know that going in. While I have never had an issue with a Spyderco Millie requiring warranty work, you buy this knowing you don't have one. The knife is otherwise clean and very sharp. S30V blade steel. This is my "Bargain Sebenza".
New, these knives are almost $350-$400. My price is $150.00. I cover fees and shipping to lower 48. http://s1275.photobucket.com/user/WGuesman/library/Millie?sort=3&page=1
Last edited:
