I still have 3 guards from first batch and made few more.
I also cut one to show what's inside and how the weld looks like. This time I passivated the welds from inside with phosphoric acid so if you grind too deep you should see a thin black "crack" just before you make a hole.
Material Stainless Steel Type 316.
Thickness 0.120" (8 gauge)
TIG welded with 316 filler rod.
Doubles:
Front 7/8" X 2-3/8", tube 1/2" X 3/4 (ID), 3/4 X 1" (OD), Slot UNDERSIZED 1/8" X 3/4"
Singles:
Front 7/8" X 1-1/2" (upper row) 7/8" X 1-3/4" (lower row), tube 1/2" X 3/4 (ID), 3/4 X 1" (OD), Slot UNDERSIZED 1/8" X 3/4". The one on the bottom-left marked with an arrow has an angle between the front plate and the tube.
I ask $20 for singles and $25 for doubles. Shipping CONUS $6. 5+ pieces - shipping is free.
PayPal preferred (dmitryong@gmail.com) Please contact me before you pay to confirm the availability.
Thank you!
I also cut one to show what's inside and how the weld looks like. This time I passivated the welds from inside with phosphoric acid so if you grind too deep you should see a thin black "crack" just before you make a hole.
Material Stainless Steel Type 316.
Thickness 0.120" (8 gauge)
TIG welded with 316 filler rod.
Doubles:
Front 7/8" X 2-3/8", tube 1/2" X 3/4 (ID), 3/4 X 1" (OD), Slot UNDERSIZED 1/8" X 3/4"
Singles:
Front 7/8" X 1-1/2" (upper row) 7/8" X 1-3/4" (lower row), tube 1/2" X 3/4 (ID), 3/4 X 1" (OD), Slot UNDERSIZED 1/8" X 3/4". The one on the bottom-left marked with an arrow has an angle between the front plate and the tube.
I ask $20 for singles and $25 for doubles. Shipping CONUS $6. 5+ pieces - shipping is free.
PayPal preferred (dmitryong@gmail.com) Please contact me before you pay to confirm the availability.
Thank you!