- Joined
- Oct 16, 2010
- Messages
- 5,626
Gentlemen:
For your consideration is my Camp Master in W-2 with a vivid hamon. The blade is full flat ground to .030" with a convex edge ground in.....the convex edge was then taken to 2000 grit and buffed with a nine micron belt loaded with green chrome compound. The blade was hand sanded to 2000 grit and lightly etched to reveal a vivid cloud hamon with lots of ghosting and character. The scales are Norfolk Pine cones cast in an acrylic polymer substrate......very pretty and set off by the red liners. The handle is sized and worked for comfortable use with great ergonomics. The solder line for the pinned guard is straight and true with no pinholes. The RH sheath holds the knife securely with a cam that "pops" in both directions. Superb fit and finish. I hope you like it! The first "I'll take it" gets it. $335 plus $18 shipping. Paypal preferred to account tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening.
V/R,
TK
.250" W-2 stock
Differential HT with clay
Parks 50 quench
10 1/2" OAL
6" Blade
Tempered to Rc 59-60
Flat ground blade - convex edge
Vivid cloud hamon
416 stainless furniture
Spine thumb serrations
Pinned & soldered guard
Norfolk Pine Polymer Scales
Tapered tang with red liners
8-10 oz Wickett & Craig leather sheath (RH)
For your consideration is my Camp Master in W-2 with a vivid hamon. The blade is full flat ground to .030" with a convex edge ground in.....the convex edge was then taken to 2000 grit and buffed with a nine micron belt loaded with green chrome compound. The blade was hand sanded to 2000 grit and lightly etched to reveal a vivid cloud hamon with lots of ghosting and character. The scales are Norfolk Pine cones cast in an acrylic polymer substrate......very pretty and set off by the red liners. The handle is sized and worked for comfortable use with great ergonomics. The solder line for the pinned guard is straight and true with no pinholes. The RH sheath holds the knife securely with a cam that "pops" in both directions. Superb fit and finish. I hope you like it! The first "I'll take it" gets it. $335 plus $18 shipping. Paypal preferred to account tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening.
V/R,
TK
.250" W-2 stock
Differential HT with clay
Parks 50 quench
10 1/2" OAL
6" Blade
Tempered to Rc 59-60
Flat ground blade - convex edge
Vivid cloud hamon
416 stainless furniture
Spine thumb serrations
Pinned & soldered guard
Norfolk Pine Polymer Scales
Tapered tang with red liners
8-10 oz Wickett & Craig leather sheath (RH)



Last edited: