- Joined
- Oct 16, 2010
- Messages
- 5,739
Gentlemen:
For your consideration is my Mountain King design in W-2/Stabilized English Walnut. The English Walnut has lots of marblecake and fiddleback figure transitioning to the unpigmented butt of the handle. This is gunstock material that I had stabilized by K&G. The blade was hollow ground to .015" and 20 degree bevels applied. The spine is rounded from the tip to the thumb serrations. I haven't made a sheath yet so you may specify RH or LH. I hope you like it! The first "I'll take it," email, or PM gets it. $275 delivered CONUS. Paypal please - tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening. Thanks for viewing my work and your comments are welcome.
V/R,
TK
5/32" W-2 stock
Differentially heat treated with clay
Normalized - Parks 50 quench - double draw
HT to Rc 59-60
8 1/4" OAL
4" Hollow ground blade
Rounded spine
400 grit belt satin finish
Stabilized premium English Walnut scales
Black liners on tapered tang
416 Stainless furniture
Pinned/soldered guard
Thumb serrations on spine
8-10 oz leather sheath RH or LH

For your consideration is my Mountain King design in W-2/Stabilized English Walnut. The English Walnut has lots of marblecake and fiddleback figure transitioning to the unpigmented butt of the handle. This is gunstock material that I had stabilized by K&G. The blade was hollow ground to .015" and 20 degree bevels applied. The spine is rounded from the tip to the thumb serrations. I haven't made a sheath yet so you may specify RH or LH. I hope you like it! The first "I'll take it," email, or PM gets it. $275 delivered CONUS. Paypal please - tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening. Thanks for viewing my work and your comments are welcome.
V/R,
TK
5/32" W-2 stock
Differentially heat treated with clay
Normalized - Parks 50 quench - double draw
HT to Rc 59-60
8 1/4" OAL
4" Hollow ground blade
Rounded spine
400 grit belt satin finish
Stabilized premium English Walnut scales
Black liners on tapered tang
416 Stainless furniture
Pinned/soldered guard
Thumb serrations on spine
8-10 oz leather sheath RH or LH

Last edited: