- Joined
- Oct 16, 2010
- Messages
- 5,663
Gentlemen:
For your consideration is my Mountaineer EDC in 1095/Desert Ironwood Burl. The hollow ground blade was hand rubbed to 2000 grit and etched to reveal a vivid hamon. The hollow ground sheepsfoot blade was ground to .020" and 20 degree bevels applied at 220 grit for a serrated edge that cuts well. I think the sheepsfoot is a great design for a utility knife. The knife can come with an ambidextrous horizontal sheath that can be worn right, left, cross-draw or vertical high-ride (L or R). The sheath incorporates a cam that holds the knife securely yet draws easily. I hope you like it! The first "I'll take it", PM, or email gets it. $250 plus $10 shipping. International sales will require additional fees. Paypal payment preferred to tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening. Thanks for viewing my work and comments are always welcome.
V/R,
TK
3/16" 1095 stock
HT to Rc 59-60
Differentially heat treated
Parks 50 quench
6 3/4" OAL
3 1/2" Hollow ground blade
Thumb serrations on spine
Vivid hamon
Premium Desert Ironwood Burl scales
Black liners on tapered tang
Corby rivet
416 Stainless furniture
8-10 oz leather horizontal sheath (ambidextrous) or high ride vertical
For your consideration is my Mountaineer EDC in 1095/Desert Ironwood Burl. The hollow ground blade was hand rubbed to 2000 grit and etched to reveal a vivid hamon. The hollow ground sheepsfoot blade was ground to .020" and 20 degree bevels applied at 220 grit for a serrated edge that cuts well. I think the sheepsfoot is a great design for a utility knife. The knife can come with an ambidextrous horizontal sheath that can be worn right, left, cross-draw or vertical high-ride (L or R). The sheath incorporates a cam that holds the knife securely yet draws easily. I hope you like it! The first "I'll take it", PM, or email gets it. $250 plus $10 shipping. International sales will require additional fees. Paypal payment preferred to tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening. Thanks for viewing my work and comments are always welcome.
V/R,
TK
3/16" 1095 stock
HT to Rc 59-60
Differentially heat treated
Parks 50 quench
6 3/4" OAL
3 1/2" Hollow ground blade
Thumb serrations on spine
Vivid hamon
Premium Desert Ironwood Burl scales
Black liners on tapered tang
Corby rivet
416 Stainless furniture
8-10 oz leather horizontal sheath (ambidextrous) or high ride vertical
Last edited:
