- Joined
- Oct 16, 2010
- Messages
- 5,742
Gentlemen:
For your consideration is this single guard Bowie in W-2/Stabilized Spalted Maple. This Bowie started out as a round nose chopper that wouldn't sell either here or my website, so it magically transformed itself into a hard-use Bowie through the efforts of my Elf Crew.
Hand rubbed finish to 400 grit pull strokes. Superb fit and finish. The swedge on this bowie is ground to zero with no secondary bevel. No sheath yet so you may specify R or L. I hope you like it! The first "I'll take it," PM, or email gets it. $275 delivered CONUS. Paypal preferred to tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening. Thanks for viewing my work and your comments are welcome.
.250" W-2 stock
HT to Rc 59-60
11" OAL
6" Satin finish blade
1 7/8" Blade height
Flat grind primary/25 degree grind secondary
Stabilized spalted maple scales
Tapered tang with red liners
Thumb serrations on spine
Zero degree sharpened swedge
416 Stainless furniture
Pinned/soldered single guard
8-10 oz sheath (R or L)

For your consideration is this single guard Bowie in W-2/Stabilized Spalted Maple. This Bowie started out as a round nose chopper that wouldn't sell either here or my website, so it magically transformed itself into a hard-use Bowie through the efforts of my Elf Crew.
.250" W-2 stock
HT to Rc 59-60
11" OAL
6" Satin finish blade
1 7/8" Blade height
Flat grind primary/25 degree grind secondary
Stabilized spalted maple scales
Tapered tang with red liners
Thumb serrations on spine
Zero degree sharpened swedge
416 Stainless furniture
Pinned/soldered single guard
8-10 oz sheath (R or L)

Last edited: