Steingass Star Point Hunter - Featherweight **WITHDRAWN**

Status
Not open for further replies.

TK Steingass

Troglodyte Knifemaker
Knifemaker / Craftsman / Service Provider
Feedback: +108 / =0 / -0
Joined
Oct 16, 2010
Messages
5,744
Gentlemen:

For your consideration is this featherweight Star Point Hunter in CPM 3V/Curly Maple. The black G-10 guard makes this is an extremely light knife at 4.2 ounces - with the horizontal carry sheath you won't even notice it on your belt. The lanyard tube is a 5/16" diameter carbon fiber arrow shaft culled from a broken shaft that I had harvested a 10 point Kansas buck - the knife has good medicine.:) The hollow ground blade has been hand rubbed and given a satin finish with 400 grit pull strokes. The spine is rounded with thumb serrations. The tang extends 2/3 of the way into the handle and set with G/flex marine grade epoxy and a 1/16" stainless pin. I hope you like it! The first "I'll take it," PM, or email gets it. $$$$ delivered CONUS. Paypal preferred to tksteingass@frontier.com. Thanks for viewing and your comments are appreciated.

V/R,

TK

.200" CPM-3V stock
HT to Rc 60-61
8 1/2" OAL
4 1/4" Hollow ground blade
Black G-10 guard
Stabilized Curly Maple handle
Radiused spine with thumb serrations
400 grit hand rubbed satin finished blade
Horizontal carry RH sheath



 
Last edited:
Thanks for the kind words fellas! I'm surprised this hasn't sold by now, but, it will eventually. :)
 
Status
Not open for further replies.
Back
Top