Steingass Takedown Hunter

TK Steingass

TK Steingass

Troglodyte Knifemaker
Knifemaker / Craftsman / Service Provider
Feedback: +108 / =0 / -0
Joined
Oct 16, 2010
Messages
5,746
Gentlemen:

For your consideration is this takedown hunter in 1095/Black G-10. This takedown is made without pins - fitup at the tang and G/flex marine grade epoxy prevent the handle and parts from rotating. Takedown fitting is a 1/4" allen head that is easily replaced if you lose it. The dark spacer is coined/fullered mild steel that has been blued. The spine is rounded with fine thumb serrations. I hope you like it! The first "I'll take it," PM, or email gets it. $425 delivered CONUS. PayPal preferred to tsteingass@yahoo.com. Thanks for viewing and your comments are appreciated.

V/R,

TK

1095 stock
.235" @ ricasso
9" OAL
4 1/2" Hollow ground blade
Hand rubbed satin finish blade
Black G-10 handle
Rounded spine - thumb serrated
Stainless furniture
Coined/fullered/blued spacer
Takedown tool
8-10 oz leather RH sheath



 
Great looking knife, perfect size for a hunting knife.
 
Beautiful Knife TK, Perfect Tinker Toy also.
The Thumb Serrations are awesome!!
I Always look forward to seeing what you come up with Next! Great Job.
 
TK, quick question... you wrote " This takedown is made without pins - fitup at the tang and G/flex marine grade epoxy prevent the handle and parts from rotating."

So are the parts epoxy'd together? Or is it a simple matter to unscrew the takedown fitting all that is holding it together? (so that one could disassemble to marvel at the construction).
 
Rob_Angerer said:
TK, quick question... you wrote " This takedown is made without pins - fitup at the tang and G/flex marine grade epoxy prevent the handle and parts from rotating."

So are the parts epoxy'd together? Or is it a simple matter to unscrew the takedown fitting all that is holding it together? (so that one could disassemble to marvel at the construction).
Click to expand...

Rob: The knife still disassembles as pictured so that one can marvel at the construction. The metal parts are fit closely to the tang. The handle is fit closely to the tang by putting release agent on all the parts/tang, putting G/flex in the handle, reassemble and let harden. The release agent allows disassembly of all the parts after the epoxy hardens so now the handle too is fitted to the tang and will not rotate.
 
You must log in or register to reply here.
Back
Top