- Joined
- Oct 16, 2010
- Messages
- 5,662
Gentlemen:
For your consideration is a Wharncliffe style EDC made from a Nicholson Handy File - the steel is W-1. The serrations are shown on the flats - first cut on the maker's side, double cut on the obverse side of the blade. The blade is deeply hollow ground on a 2" wheel to 220 belt finish. The serrated flats are left in the temper blue state......my maker's mark is buried in the serrations. The finish on the premium Turkish Walnut handle is CA - rubbed, steeled, then buffed to a shiny finish. The right hand horizontal sheath can also be worn cross draw or behind the back. Three thumb serrations are machined into the spine. A very handy EDC I believe. I hope you like it! The first "i'll take it," PM, or email gets it. $150 delivered. Paypal preferred to my account tksteingass@frontier.com
V/R,
TK
1/8" W-1 Nicholson File
HT to Rc 58-59
3 1/2" Hollow ground blade
7 1/2" OAL
File serrated temper blue flats
Three machined thumb serrations on spine
Hollow ground blade -220 belt finish
3/32" 416 Stainless pins
Premium Turkish Walnut scales
Red liners
8-10 oz RH horizontal sheath
For your consideration is a Wharncliffe style EDC made from a Nicholson Handy File - the steel is W-1. The serrations are shown on the flats - first cut on the maker's side, double cut on the obverse side of the blade. The blade is deeply hollow ground on a 2" wheel to 220 belt finish. The serrated flats are left in the temper blue state......my maker's mark is buried in the serrations. The finish on the premium Turkish Walnut handle is CA - rubbed, steeled, then buffed to a shiny finish. The right hand horizontal sheath can also be worn cross draw or behind the back. Three thumb serrations are machined into the spine. A very handy EDC I believe. I hope you like it! The first "i'll take it," PM, or email gets it. $150 delivered. Paypal preferred to my account tksteingass@frontier.com
V/R,
TK
1/8" W-1 Nicholson File
HT to Rc 58-59
3 1/2" Hollow ground blade
7 1/2" OAL
File serrated temper blue flats
Three machined thumb serrations on spine
Hollow ground blade -220 belt finish
3/32" 416 Stainless pins
Premium Turkish Walnut scales
Red liners
8-10 oz RH horizontal sheath
Last edited:
Very nice TK !
