- Joined
- Oct 16, 2010
- Messages
- 5,663
Gentlemen:
For your consideration is my Presentation Grade Woods Scalpel design in CPM-154 and Fiddleback Walnut. The blade was deeply hollow ground with an eight inch wheel to .020" and 20 degree bevels ground, making this a real slicer. The tang extends 3/4 of the way into the handle, set with G/Flex epoxy and a single brass pin. The bevels were ground with 220 grit for a toothy, long lasting serrated edge that will continue to cut even after hitting bone. The blade was hand rubbed to a 400 grit satin finish. The spine has a thumb groove machined with a smooth bottom - very comfortable. The guard is 416 stainless and brass with red spacers - the pin is brass and the lanyard tube is stainless. The Black Walnut handle has great color contrast and is covered with broken Fiddleback figure with worked in Truoil finish up to 1200 grit. Superb fit and finish. I haven't made the sheath yet so the buyer may specify right or left. I hope you like it! The first PM, email, or "I'll take it" gets it. $325 plus $18 shipping....international shipping will require additional postage. Paypal preferred to my account tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening.
V/R,
TK
5/32" CPM-154 stock
HT to Rc 60-61
Double tempered
9 3/4" OAL
5" Hollow ground blade
Soldered guard
400 grit hand rubbed satin finish
Machined thumb rest on spine
416 SS/brass furniture
Fiddleback Walnut handle
8-10 oz leather sheath (R or L)
For your consideration is my Presentation Grade Woods Scalpel design in CPM-154 and Fiddleback Walnut. The blade was deeply hollow ground with an eight inch wheel to .020" and 20 degree bevels ground, making this a real slicer. The tang extends 3/4 of the way into the handle, set with G/Flex epoxy and a single brass pin. The bevels were ground with 220 grit for a toothy, long lasting serrated edge that will continue to cut even after hitting bone. The blade was hand rubbed to a 400 grit satin finish. The spine has a thumb groove machined with a smooth bottom - very comfortable. The guard is 416 stainless and brass with red spacers - the pin is brass and the lanyard tube is stainless. The Black Walnut handle has great color contrast and is covered with broken Fiddleback figure with worked in Truoil finish up to 1200 grit. Superb fit and finish. I haven't made the sheath yet so the buyer may specify right or left. I hope you like it! The first PM, email, or "I'll take it" gets it. $325 plus $18 shipping....international shipping will require additional postage. Paypal preferred to my account tksteingass@frontier.com. Maker's lifetime common sense warranty and free sharpening.
V/R,
TK
5/32" CPM-154 stock
HT to Rc 60-61
Double tempered
9 3/4" OAL
5" Hollow ground blade
Soldered guard
400 grit hand rubbed satin finish
Machined thumb rest on spine
416 SS/brass furniture
Fiddleback Walnut handle
8-10 oz leather sheath (R or L)

Last edited: