billygoat78
Gold Member
- Joined
- Mar 24, 2009
- Messages
- 770
I have a few knives here for sale or trade. Description to follow picture. Please read everything carefully, and the first unconditional "I'll take it" posted here gets the knife. All prices include shipping to CONUS. Paypal preferred, "gift" or add 3%. Buyer is responsible for complying with applicable knife laws.
I will not be able to ship these knives until Friday or Saturday
-Boker Turbine Jr. First Production run, #061. This guy has seen some pocket time, it's served me well in EDC rotation for a few years, but I've moved to other things. Has been sharpened, the black coating particularly on the back side of the blade near the tip has been worn off. It's not bad, but it's worth noting. Locks up pretty much dead center behind blade and very solid. Lots of life left in this one. X-15TN steel, g10 inlay on front side Comes with original Boker box, but I have no pivot tool. $> 100 > 95 shipped
-Kershaw OD-1. I've had this one a while but never used it. Like new condition (you'd never know it wasn't new). I can't find the original box, but it will come in a similar Kershaw Zing box. $ Sold
-CR Umnumzaan. Has been lightly carried and lightly used. A few minor scuffs on handle, the type you get after carrying a few days, and the blade looks new. It's currently wearing blue O-rings on the thumb studs, but will ship with red, black, glow, and whatever else I can find as well. Has an unstamped lock stabilizer bar (it's a plain disc) and an old style pivot. This guy is just a bit bigger than what I end up carrying. Comes with all the fixings except the pivot tool. > $old
-Al Mar mini SERE. This one has seen some use but is in good condition. I took it apart to clean it not so long ago and the backspacer shot up in the air and behind the couch (I found it, don't worry). Turns out there's some strange spring loaded contraption behind the handle scales that hold the backspacer in. I lacked the patience, ability, and desire to load the backspacer back in when I reassembled the knife, and this somehow results in a knife with a bit stronger detent. I don't feel it's a problem, but it is a bit stronger detent than normal. There are about 4 pillars still holding the handle together so the backspacer is not required for structural purposes. The backspacer will be included. Otherwise good condition. In box. > $90 > 85
-Custom Sypderco Delica ZDP FFG. Wavy red/maroon g10 handles by Mioduz (Fortius Arms), all hardware blasted and tumbled to a nice dark matte grey, and final edge by me (by hand on waterstone and strop. It's a mirror edge and shaving sharp). Stamped with Fortius Arms logo. Carried it for a day or two but never cut more than paper. I wandered into a custom recently that hit the spot, and I know this delica just isn't going to get the pocket time it deserves. Not a single scratch. Ships with box and original FRN scales. > $135
-Boker Titan Defender Lightweight. Brand new in box, fresh from the factory. Catch and release. It's a tad off center closed, and the clip got a bit mashed in the box (it's a tight fit), but it could easily be opened back up a little. Big fat liners, micarta handle, just a bit big for my taste > $160
-Sprint Spyderco ZDP Delica, sabre grind. This was the first solid ZDP blade anyone ever made. Model C11PBLE Powder blue handles, limited to 2 runs of 600 each (I believe). Discontinued 7 years ago. I was going to save this one as a collector, but since I've got others on the table I figured I'd free up a bit more cash for more knives later. Brand new in box (old style spyderco box). > $100 >95
-Fiddleback KPH fixed blade with Shadetree glow yarn handles. The shape of this one appealed to me, but the handle is too big for my medium-small hand and I never ended up using it. I did start sanding the handle down, reducing it's diameter, particularly at the butt end, but I stopped short of where I'd like it. It'd probably be fine as-is for large or uber-large hands. The handle is also a bit coarse at the moment, both for grip and because I haven't sanded it with higher than 120 grit yet. Has been used and sharpened but is in great condition. Comes with a leather sheath that a previous owner made, but it has no stitch guard (no center leather strip), it's just a taco, so I wouldn't recommend using it hard. $ SOLD
-Kellam Wolverine. Puukko style. Like new. SPT differentially heat treated steel. I think I shaved a tiny stick, but you can't tell. I also oiled the sheath a bit so it would fit better and because I live in an extremely dry climate. I wanted to try a puukko/scandi type, but just can't get used to not having a guard. Really nice knife, the handle feels incredible, it's just not for me. Comes with traditional style sheath with hard insert $ 75
FREE KNIVES (with any purchase, just ask)
-Kershaw Responder fixed blade. Combo edge, screwdriver tip, seatbelt hook. Kydex sheath included
-5.11 POS knife. This miserable piece was lovingly handcrafted by Blind Uncle Rico and his 7 thumbless children. Blade stamped "Authentic 2010 Tactical"
GONE
-(not pictured) Cold Steel Finn Bear puukko fixed. taiwan, w/ ballistic sheath - GONE
-----------------------------------------
Wish list includes:
Mnandi, TAD Dauntless, BRKT rampless Gunny
open to other offers
See also my Laconico Workman posted in the Customs section - GONE
I will not be able to ship these knives until Friday or Saturday
-Boker Turbine Jr. First Production run, #061. This guy has seen some pocket time, it's served me well in EDC rotation for a few years, but I've moved to other things. Has been sharpened, the black coating particularly on the back side of the blade near the tip has been worn off. It's not bad, but it's worth noting. Locks up pretty much dead center behind blade and very solid. Lots of life left in this one. X-15TN steel, g10 inlay on front side Comes with original Boker box, but I have no pivot tool. $> 100 > 95 shipped
-Kershaw OD-1. I've had this one a while but never used it. Like new condition (you'd never know it wasn't new). I can't find the original box, but it will come in a similar Kershaw Zing box. $ Sold
-CR Umnumzaan. Has been lightly carried and lightly used. A few minor scuffs on handle, the type you get after carrying a few days, and the blade looks new. It's currently wearing blue O-rings on the thumb studs, but will ship with red, black, glow, and whatever else I can find as well. Has an unstamped lock stabilizer bar (it's a plain disc) and an old style pivot. This guy is just a bit bigger than what I end up carrying. Comes with all the fixings except the pivot tool. > $old
-Al Mar mini SERE. This one has seen some use but is in good condition. I took it apart to clean it not so long ago and the backspacer shot up in the air and behind the couch (I found it, don't worry). Turns out there's some strange spring loaded contraption behind the handle scales that hold the backspacer in. I lacked the patience, ability, and desire to load the backspacer back in when I reassembled the knife, and this somehow results in a knife with a bit stronger detent. I don't feel it's a problem, but it is a bit stronger detent than normal. There are about 4 pillars still holding the handle together so the backspacer is not required for structural purposes. The backspacer will be included. Otherwise good condition. In box. > $90 > 85
-Custom Sypderco Delica ZDP FFG. Wavy red/maroon g10 handles by Mioduz (Fortius Arms), all hardware blasted and tumbled to a nice dark matte grey, and final edge by me (by hand on waterstone and strop. It's a mirror edge and shaving sharp). Stamped with Fortius Arms logo. Carried it for a day or two but never cut more than paper. I wandered into a custom recently that hit the spot, and I know this delica just isn't going to get the pocket time it deserves. Not a single scratch. Ships with box and original FRN scales. > $135
-Boker Titan Defender Lightweight. Brand new in box, fresh from the factory. Catch and release. It's a tad off center closed, and the clip got a bit mashed in the box (it's a tight fit), but it could easily be opened back up a little. Big fat liners, micarta handle, just a bit big for my taste > $160
-Sprint Spyderco ZDP Delica, sabre grind. This was the first solid ZDP blade anyone ever made. Model C11PBLE Powder blue handles, limited to 2 runs of 600 each (I believe). Discontinued 7 years ago. I was going to save this one as a collector, but since I've got others on the table I figured I'd free up a bit more cash for more knives later. Brand new in box (old style spyderco box). > $100 >95
-Fiddleback KPH fixed blade with Shadetree glow yarn handles. The shape of this one appealed to me, but the handle is too big for my medium-small hand and I never ended up using it. I did start sanding the handle down, reducing it's diameter, particularly at the butt end, but I stopped short of where I'd like it. It'd probably be fine as-is for large or uber-large hands. The handle is also a bit coarse at the moment, both for grip and because I haven't sanded it with higher than 120 grit yet. Has been used and sharpened but is in great condition. Comes with a leather sheath that a previous owner made, but it has no stitch guard (no center leather strip), it's just a taco, so I wouldn't recommend using it hard. $ SOLD
-Kellam Wolverine. Puukko style. Like new. SPT differentially heat treated steel. I think I shaved a tiny stick, but you can't tell. I also oiled the sheath a bit so it would fit better and because I live in an extremely dry climate. I wanted to try a puukko/scandi type, but just can't get used to not having a guard. Really nice knife, the handle feels incredible, it's just not for me. Comes with traditional style sheath with hard insert $ 75
FREE KNIVES (with any purchase, just ask)
-Kershaw Responder fixed blade. Combo edge, screwdriver tip, seatbelt hook. Kydex sheath included
-5.11 POS knife. This miserable piece was lovingly handcrafted by Blind Uncle Rico and his 7 thumbless children. Blade stamped "Authentic 2010 Tactical"
GONE-(not pictured) Cold Steel Finn Bear puukko fixed. taiwan, w/ ballistic sheath - GONE
-----------------------------------------
Wish list includes:
Mnandi, TAD Dauntless, BRKT rampless Gunny
open to other offers
See also my Laconico Workman posted in the Customs section - GONE
Last edited:
