Strider Help!

Status
Not open for further replies.
M

Miknuyh

Joined
Dec 5, 2014
Messages
460
i have two strider SNG dgg.
One is s30v and other is a 154.
But they look different to me for example
S30v strider logo is thicker compared to the 154
S30v lock side seems thinner than 154.
And g-10 on s30v is thicker than 154.
Also screws on 154 seems to stick out a little more than s30v by screws I mean g-10 side screws.
Is one of them fake?

Also on the 154 sng there is a line through the top of the stop pin I'll try get a picture. Line as in a hair line crack......
 

Attachments

  • image.jpg
    image.jpg
    30.1 KB · Views: 44
Last edited:
First off, where did you get them? That will go a long ways towards helping us help you. Post pics of the whole knife, with attention to the stampings, the Strider logo etc. Strider has gone through many design changes and there are certain things that have changed over the years. There are folks that know much more than me, but collectively we'll try to help. There's a chance there is a crack above the stop pin, it happens sometimes. If it is have absolutely no worries. Strider will replace the blade no questions asked.
 
Status
Not open for further replies.
Back
Top