- Joined
- Jan 20, 2010
- Messages
- 663
Strider Karambit, Benchmite, Bark River PSK, George Lainhart
Please add $5.00 for shipping.
PayPal add 4% for fees or gift option.
I will ship with DC #
These will be for sale on multiple sites so first I'll take it by time gets it.
Strider Karambit MB limited run {original edge with very light use } Has some kydex marks on blade. $275.00
Overall Length: 9.25 in.
Blade Length: 5.50 in.
Cutting Length: 3.65 in.
Blade Thickness: .19 in.
Blade Material: CPMS 30V
Finish: Strider KnivesTiger Stripe subdued
Sheath: Bladetech molded Kydex®
Bark River PSK first production with orange G10 SOLD
Never used or carried / only handled. It is printed on one side of blade first production.
Has some very lite marks from sheath. Comes with two sheaths shown in pictures. I only attempted to add a little glue on orange Kydex to try to seam edge where knife goes in.
George Lainhart custom knife supposedly made for navy seals. $105.00
Has been carried quite a bit but never used. Last photo shows marking better on blade. They are now faded.
Blade - 120.65mm(4.75")
Thickness - 4.74mm
OAL - 225.30mm(8.87")
Steel - ATS-34 steel at 56-57HRC
Handle - Steel
Benchmade Benchmite NIB 10610 with auto spring not attached. Blade is centered and lock up tight. SOLD
I have a spring that will make this automatic. I did not have small enough tool to take it apart and install but it will come with it.
Please add $5.00 for shipping.
PayPal add 4% for fees or gift option.
I will ship with DC #
These will be for sale on multiple sites so first I'll take it by time gets it.
Strider Karambit MB limited run {original edge with very light use } Has some kydex marks on blade. $275.00
Overall Length: 9.25 in.
Blade Length: 5.50 in.
Cutting Length: 3.65 in.
Blade Thickness: .19 in.
Blade Material: CPMS 30V
Finish: Strider KnivesTiger Stripe subdued
Sheath: Bladetech molded Kydex®
Bark River PSK first production with orange G10 SOLD
Never used or carried / only handled. It is printed on one side of blade first production.
Has some very lite marks from sheath. Comes with two sheaths shown in pictures. I only attempted to add a little glue on orange Kydex to try to seam edge where knife goes in.
George Lainhart custom knife supposedly made for navy seals. $105.00
Has been carried quite a bit but never used. Last photo shows marking better on blade. They are now faded.
Blade - 120.65mm(4.75")
Thickness - 4.74mm
OAL - 225.30mm(8.87")
Steel - ATS-34 steel at 56-57HRC
Handle - Steel
Benchmade Benchmite NIB 10610 with auto spring not attached. Blade is centered and lock up tight. SOLD
I have a spring that will make this automatic. I did not have small enough tool to take it apart and install but it will come with it.
Last edited: