- Joined
- Jul 10, 2011
- Messages
- 1,941
Same story as always, stuff comes in, stuff goes out:
Strider SnG-T - $300 - Bought this new from Monkey Edge. Used lightly, and due to a lack of lockbar tension developed a little play. It was sent back to Strider and is now perfect. Centering is perfect, lockup is early (unusual for a Strider), and the blade drops freely. It has been touched up on the superfine Wicked Edge Ceramics at the original factory angle. There is some slight wear marks on the blade, as the tiger stripe tends to scuff easily. The flamed Ti similarly has a few cosmetic marks as well. CPM-S30V steel. Comes with tactical plastic baggie.
Lionsteel SR-1A TNP - $100 SOLD - Purchased new from BladeHQ along with a satin model, I prefer the latter. This one was carried, lightly used, and resharpened to a mirror polish on my Edge Pro at the factory angle. It is priced as a user; the handle has a number of small pinpricks where the anodizing has worn off (the white dots you see) and the blade has a few scuffs in the coating. Lockup is typically rock solid, centering is slightly off to the right, and it is super smooth. The detent is on the lighter side. D2 steel. Comes with original box.
Combative Edge M1 2012 - $80 SOLD - Another user that was purchased new. Blade coating shows some wear at the edge from use, and it has been stropped but not sharpened. Some scuffs on the sandblasted Ti side, and the pocket clip has been given an acid stonewash to better match the Ti. Much of the paint on the pivot is wearing off. Lockup is very solid, centering is slightly off to the right. Detent is strong, but the knife is not set up to flip properly. Rockets out with the thumbstuds, but requires a lot of practice to get it to flip. It is extraordinarily smooth for a knife running on washers. N690 steel. Comes with original box.
All prices include paypal fees and shipping. Feel free to email me with any questions!
First "I'll take it" gets it.
Paypal Goods and Services only
Ships USPS Priority
Only trades would be for ZT620CF, Large Sebenza 21 insingo, or Spyderco K2
Strider SnG-T - $300 - Bought this new from Monkey Edge. Used lightly, and due to a lack of lockbar tension developed a little play. It was sent back to Strider and is now perfect. Centering is perfect, lockup is early (unusual for a Strider), and the blade drops freely. It has been touched up on the superfine Wicked Edge Ceramics at the original factory angle. There is some slight wear marks on the blade, as the tiger stripe tends to scuff easily. The flamed Ti similarly has a few cosmetic marks as well. CPM-S30V steel. Comes with tactical plastic baggie.
Lionsteel SR-1A TNP - $100 SOLD - Purchased new from BladeHQ along with a satin model, I prefer the latter. This one was carried, lightly used, and resharpened to a mirror polish on my Edge Pro at the factory angle. It is priced as a user; the handle has a number of small pinpricks where the anodizing has worn off (the white dots you see) and the blade has a few scuffs in the coating. Lockup is typically rock solid, centering is slightly off to the right, and it is super smooth. The detent is on the lighter side. D2 steel. Comes with original box.
Combative Edge M1 2012 - $80 SOLD - Another user that was purchased new. Blade coating shows some wear at the edge from use, and it has been stropped but not sharpened. Some scuffs on the sandblasted Ti side, and the pocket clip has been given an acid stonewash to better match the Ti. Much of the paint on the pivot is wearing off. Lockup is very solid, centering is slightly off to the right. Detent is strong, but the knife is not set up to flip properly. Rockets out with the thumbstuds, but requires a lot of practice to get it to flip. It is extraordinarily smooth for a knife running on washers. N690 steel. Comes with original box.
All prices include paypal fees and shipping. Feel free to email me with any questions!
First "I'll take it" gets it.
Paypal Goods and Services only
Ships USPS Priority
Only trades would be for ZT620CF, Large Sebenza 21 insingo, or Spyderco K2
Last edited:
