Strix: A Custom Fixed Blade from Terrio Handmade Knives

Joined
Feb 1, 2012
Messages
11,783
IMG_7167_zps36a07590.jpg


James Terrio first came to my attention through his great sense of humor and support of Bladeforums. Looking further, reading through his web site and noting others' reports of their experiences with his work, I decided to contact him once I was ready to order a fixed-blade knife. From the first of our knife-specific conversations, he confirmed my choice.

Starting with, I told him I wanted a no-nonsense, pocketable fixed blade to "cut cheese 'n sticks 'n stuff. Also blue." He met me right there (heh), and came up with this (my first glimpses, for approval before heat treat):
james terrio said:
Blade specs: O1 Tool Steel, Full Flat Ground, Tapered Tang, 7 5/16", Swoony Plunge Line
(That last distinctive is my addition to its description; it's a favorite feature.)

Thus was born the Strix.

"Blue" turned out to be a surprising challenge, at least as far as hitting the Easy Button with commonly-available materials. Here's where James especially shone in working with me: he understood that the shade of blue was very important to me (it was, in fact, a primary motivation for going Custom), and was both patient and creative in suggesting materials and/or the staining thereof.

Some of the possibilities (also known as, Rejected Ideas):
james terrio said:
ResizeIII_zps72192777.jpg

(Dymondwood, stained wood, G10)

My own forays:
MinWax2_zps8ab71127.jpg

(Elderberry Corian, MinWax possibilities)

[I cannot overstate Jame's patience and help when it comes to matters of Blue.]

I finally hit upon the idea of Paperstone, based on how much I liked the weight and feel of my Paperstone-handled Buck kitchen knives. After a false start ("Denim" Paperstone turning out to be, for all intents and purposes, "Black"), I was able to locate a remnant of (discontinued-color-)Indigo Paperstone, and we were Good to Go. Huzzah!
PaperstoneRUs_zpscd5668cb.jpg

(Chocolate-Paperstone-clad Buck knives, Strix, Denim sample, Indigo backdrop)

Meanwhile, back from heat treat on the Table o' Joy-- see it?
james terrio said:

And then, The Reveal:
james terrio said:
"Pocketable": The tab on the front of the sheath, made by Jame's wife Angie, serves as a push-off point when drawing the knife, and also provides a way to anchor the sheath (whether to a belt loop when the sheath's in my pocket, or within another bag, etc.) The magnet at the sheath's bottom provides extra security-- a very nice touch.
james terrio said:
IMG_7447_zps91dca015.jpg


In the most fortuitous of timing, after the months of waiting, my Strix arrived on my birthday-- and this, despite a tracking number that indicated it would miss by two days. The knife arrived just before I left for my birthday dinner, so I have no pictures of its blade "pristine"-- here, it's already had Birthday Steak:
b0cfd2a5-d0b8-4b21-9778-24a6f462a9d1_zps113902ca.jpg


In hand:
IMG_6826_zps5342a881.jpg


In the month since I've had my Terrio knife, I've carried or kept it nearby every day, using it for everything knife-ly that has arisen, from food to fun and back again. I haven't had to try to like it; it's by far the most comfortable knife I've held, and it slices into or through every chosen material with aplomb.

Sticks!
IMG_7446_zpsd304f5cc.jpg


Cheese!
IMG_7355_zps2e2ab754.jpg


Way-cool O1 patina:
IMG_7168_zps8858392a.jpg


But honestly, one of my favorite things to do with it? Cut newspaper. The grind James put on this knife is a thing of functional beauty. I love how readily the knife cuts through everything I want it to, how instantly it responds to stropping or a light kiss of ceramic. So, I cut sticks 'n cheese 'n stuff, then slice newspaper. Because it's fun. :)

This is my first-ever custom anything, and I couldn't be more pleased with the process and outcome, from start to finish. James listened to what I wanted (as best I could articulate it, with humor but also with some specific objectives) and created a knife for me that is far better than I knew to ask for. His communication throughout was excellent, including the many ways he reflected back that he understood my concerns/questions/sometimes ridiculously idiosyncratic affection for blue.

IMG_6782_zps7dd88db4.jpg


IMG_6666_zpsb738b3f8.jpg


Thanks, James.

~ P.
 
Last edited:
Very nice! Ever think of having the blade blued? Something like an old charcoal bluing like colt? I've seen some really spectacular restorations by Turnbull.

I saw a knife the other day with blued blades. It was pretty.
 
Very nice, I like the paperstone blue. James sounds like a great guy to work with. I always enjoy his unique comments. And his avatar pic is hoot.
 
Last edited:
It sure looks like an amazing slicer.
The patina comes along nicely, the blue-gray color and its texture really suits the paperstone handle (another indicator that you chose the right material :)).
 
Thanks for sharing your thoughts Sarah. What you just wrote describes quite well the enjoyable process of commissioning a custom knife. It's awesome when the maker understands your wishes and then brings it to fruition. Almost like having your own personal genie. :D

- Christian
 
I have an EDC/necker on the way from James as well (it is actaully one of the knives in the pic of the heat treat table, bottom right). I can mirror your sentiments that James is extremely accomodating and easy to work with. His use of magnets in the sheath and other small touches speak to his creativity and skill. Hope you enjoy the heck out of it, can't wait to get mine! I may post a review with pics as well because there are a lot of people on these forums who NEED a Terrio Handmade original!
 
See, I keep thinking to myself, "Nah, I'll never order a custom; too much trouble and I'll be too afraid to actually use it", then I see this again and hear how good of an experience it was...
 
I've always appreciated James' sense of humor here on Bladeforums, but it's good to know that it translates to the process of collaboration. Nice knife, too.
 
Ever think of having the blade blued? Something like an old charcoal bluing like colt? I've seen some really spectacular restorations by Turnbull.

I saw a knife the other day with blued blades. It was pretty.

I'll bet that looks great! Thing is, I'm really enjoying watching this blade's patina change daily. I think I'll save blueing for a blade paired with a non-blue handle. ;) Thanks for the idea, however.

Very nice, I like the paperstone blue. James sounds like a great guy to work with. I always enjoy his unique coments. And his avatar pic is hoot.

His avatars at the time of commissioning included James himself in a plastic viking helmet, and a cartoonish, battered viking. A "hoot" throughout!

It sure looks like an amazing slicer.
The patina comes along nicely, the blue-gray color and its texture really suits the paperstone handle (another indicator that you chose the right material :)).
Thanks! As confident as I was that I'd found the right material...
IndigoPaperstone_zpsc1af3f31.jpg

...I'm pleasantly surprised at the level of variegation once finished, especially the lighter highlights. My understanding is that the material may darken some with time and use; that'll be cool, too. :cool:

The blue often looks greener/brighter in pictures than it appears in day-to-day life.
This is fairly accurate, under most lighting conditions:
IMG_7165_zpsac5f8a87.jpg


But, it lights up well :):
IMG_7405_zps1b23f8b7.jpg


I have an EDC/necker on the way from James as well (it is actaully one of the knives in the pic of the heat treat table, bottom right).

Oh, very cool. I'm enjoying watching the various pieces on that table come to fruition, or more often, backtracking to spot them on the table after beholding their finished form. That bottom right knife had caught my eye, due to its size and lil' belly. I look forward to seeing it once it's done!

I can mirror your sentiments that James is extremely accomodating and easy to work with. His use of magnets in the sheath and other small touches speak to his creativity and skill. Hope you enjoy the heck out of it, can't wait to get mine! I may post a review with pics as well....

Agreed, and: please do. :-)

~ P.
 
Thanks for the kind words and great write-up, pertinux! This was a fun project, and I like the design we came up with so much, it will be a standard model from now on. It's very satisfying to see it being used often. :thumbup:
I have an EDC/necker on the way from James as well (it is actaully one of the knives in the pic of the heat treat table, bottom right).

It should arrive any day now :)
 
Thanks for this great write up ~P, sounds like you had a very pleasing adventure acquiring your new sidekick...it is such a joy to be able to get something created to meet your needs and wishes, and then have the pleasure of actually using it. Much more personal than getting something " off the rack" so to speak. This knife shows a keen eye for design in both form and function :thumbup:
 
Fantastic!

I have mentioned before how much I like the look of this one. Nice to hear I may be able to obtain one similar to it one of these days.
 
Very nice Sarah. I'm a big small fixed blade fan myself. It's fun to work with the maker. Looks like you and Jim came up with a nice one.
 
Thanks for the photos, write up and pictures especially. It looks very, very good. Congratulations on a great knife Sarah. Great job James!!! :thumbup: :thumbup:

Ed J
 
Last edited:
Back
Top