Strong folder

N

neocon

Joined
Mar 16, 2005
Messages
19
I broke the liner lock on a CRKT M16 Special Forces :grumpy:
At the time I din't know a twisting action was hard on folders but I found out. Now I want a folder that has a very strong lock. I bet some of you have on opinion on what the strongest folder. :D
I will be using this knife for general utility, and self defense if it comes to that.
 
I've yet to see a folding knife that is as sturdily built as a Greco frame locking folder. That includes Strider and CRK, as well as the rest of the "hard use" manufacturers.

They make fantastic utility knives. If you don't really care about looks and panache and just want something that cuts well and is reliable, then you should take a look at one.
 
Welcome to BladeForums! You have come to the right place. :D

How much can you spend? That will be a big factor in what kind of suggestions you get. On the more expensive side of things would be knives made by Strider, Chris Reeve and Extrema Ratio. On the more economical side would be a Benchmade Axis lock model, or some Spyderco MBD rated blades.

Also how big do you want to go? That is also a pretty major issue to consider here.
 
My vote goes to the folders from a company called "Strider"....perhaps you've heard of them?:D :D :D ;)
 
For a little more reasonably priced option, you could look at the Benchmade 806, 710, or 550
 
If I could I'd like to keep it under $150 but I may go higher for something I really love. The thing is who can afford to loose a $300 knife. As far as size bigger is better. :p
 
We just had a pretty good discussion of beefy folders in this thread.

There are a ton of opinions on this subject, mine is one.

I personally like the original Chinook for a pure bullet proof uber strong folder. If you want something with a little more cutting ability and a super strong lock check out the Benchmade Axis folders, the 710 or 806 would be excellent choices.

For lateral strength a liner lock is not going to be as secure as a comparably built lockback or axis lock because as force flexes the frame you have a higher likelyhood of lock failure. Of course the stress that would cause this type of failure is increased the beefier the knife gets.

With the Axis and lockback the locking mechanism is not a part of the frame so it's less affected by frame flex.
 
I would also look at Extrema Ratio.

One Stop Knife shop is blowing theirs out. Great knife at a discount :D
 
My recommendation is the Spyderco Manix.... :cool:

IMO, the strongest folder in the Spyderco line.

attachment.php
 
Greco folders are incredibly strong. Good luck finding one. He doesn't make them anymore and I'm keeping both of mine.

Axis locks and lockbacks are very reliable, even under torque. Spyderco's heavy duty lockback folders are strong enough that your hand would probably give out before the lock did. Spyderco's compression lock is tough, too, especially the "backwards" compression lock on the Gunting.

The only liner locks I would recommend are the original Buck/Strider, not the Tarani model, and the Strider AR (or GB). The others are OK for cutting but I wouldn't trust them in prybar situations.
 
I dont think you can go wrong with a Buck/Strider 880SP (full size or mini).ATS-34 steel, G10 handle and titanium liners. A good option for under $150.
 
Buck 110. Stock/custom. It could be the "first" tactical folder in modern western civilization. If u r into modern design, however, that's another story. Personally, I am cool with its old-schoolness.
 
My bet is Buck Strider 880:
Buck880SP_11.jpg


Buck880SP_02.jpg


And of course Srider (much more expensive):
strider01-01.jpg


strider01-02.jpg


strider01-03.jpg


strider02-01.jpg


Thanks, Vassili.
 
Esav Benyamin said:
Greco folders are incredibly strong. Good luck finding one. He doesn't make them anymore and I'm keeping both of mine.
Click to expand...

Last I heard, they are still available from his website for $75, which I consider a bargain.
 
Nobody mentioned an axis?

I have seen liner locks wich didn´t lock up if you open them slowly, but any axis opens up safely at any force or speed.

If you consider a blade thickness of 3 mm is enough on a knife, nearly any Benchmade axis lock will serve well.

I prefer the 520 but most found it too heavy or too thick on the handle, so have a look at the discontinued 720 series for a strong medium folder or the both lager 710 HS or 806D2. I used to carry the 806 for personal preference but would recommend the 710 HS (M2 steel) for the more utility knife.

Axis has plenty of strength.
 
You must log in or register to reply here.
Back
Top