CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
This one started out as a custom request variation of my 12 Bravo model from a fellow forum member
ironwagon
. The custom requests and changes were so good I had to add it to my rotation permanently as a new model the "Struik". Struik means bush in Afrikaans and Dutch. Credit for the name goes to
ironwagon
as well.
The striking point on the back is chamfered and rounded off with no sharp corners. If you like the knife but don't like the point just let me know and I can easily round it off completely.
This blade is made from 5/32" AEBL sabre ground and hand sanded to a satin 800. After finishing and grinding the spine is a little over 1/8" The handle is made from tan G10 and copper.
The sheath is kydex with a 9-10 ounce leather belt loop and stabilized 5/16"burl firesteel. Everything on the sheath is ambidextrous and can switch sides using the Chicago bolts. The holes for the belt loop are also spaced for a Tek-Lok.
Also just figured my new vinyl cutter out so I am able to easily mark the blades with the steel type for the first time.
Price (SOLD), shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 5/32" AEBL
Grind: Sabre
Blade: 4 1/2"
Handle Material: Tan G10 and copper
Overall Length: 9 3/8"
Sheath: kydex with a 9-10 ounce leather belt loop and stabilized burl firesteel
Weight: 6.3 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
This one started out as a custom request variation of my 12 Bravo model from a fellow forum member
ironwagon
. The custom requests and changes were so good I had to add it to my rotation permanently as a new model the "Struik". Struik means bush in Afrikaans and Dutch. Credit for the name goes to
ironwagon
as well.The striking point on the back is chamfered and rounded off with no sharp corners. If you like the knife but don't like the point just let me know and I can easily round it off completely.
This blade is made from 5/32" AEBL sabre ground and hand sanded to a satin 800. After finishing and grinding the spine is a little over 1/8" The handle is made from tan G10 and copper.
The sheath is kydex with a 9-10 ounce leather belt loop and stabilized 5/16"burl firesteel. Everything on the sheath is ambidextrous and can switch sides using the Chicago bolts. The holes for the belt loop are also spaced for a Tek-Lok.
Also just figured my new vinyl cutter out so I am able to easily mark the blades with the steel type for the first time.
Price (SOLD), shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 5/32" AEBL
Grind: Sabre
Blade: 4 1/2"
Handle Material: Tan G10 and copper
Overall Length: 9 3/8"
Sheath: kydex with a 9-10 ounce leather belt loop and stabilized burl firesteel
Weight: 6.3 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
