Suggest an EDC fixed-blade?

4

4W4K3

Joined
Dec 13, 2006
Messages
603
New here, got a few questions.

I work in an auto shop and am constantly prying on cars, cutting boxes open, etc. I've always used my Buck 503 Prince...but dousing it in oil and grease daily has REALLY started to be a pain. The wood scales are pretty ruined now.

So I'm looking for a SMALL fixed-blade knife I can use, for some pretty heavy use. Alot of prying will be done, and the usualy cutting of plastic and tape and such. A SHORT blade is necessary I think, as it will bend less when prying.

What do you suggest? Here is what I've found so far...

http://www.amazon.com/Linder-Pakkaw.../002-0973443-6608846?ie=UTF8&s=sporting-goods

Fancy wood isn't necessary, functionality is my #1 concern. Since it will be getting dirty engine oil, battery acid, dirt, grease, etc. on it all day long...a plastic/steel handle would probably work better.

Just keep in mind I'd like it to be small. Blade length 2-3" MAX, overal length maybe 6.5" MAX.
 
Graham Knives stubby Razel.

Stubbyrazel.jpg


You can do a bit of prying with 3/16" thick steel. Total length 6", blade 2.25". Standard model is $165, but you can spend more if you want to gussy it up.
 
I was hoping for under $100. Anymore options? The Fallkniven seems like it would work but I want a few more options before I decide to go for one.
 
That Linder you're looking at is made in China IIRC.

For the type of work you're talking about, I think you
don't need to spend anywhere near 100.00.

I think you should pick up a few CRKT Ryan Plan B's.

3" blade, Zytel handle, Zytel sheath, and a nice thick blade
of AUS 6. Very sharp out of the box. Good build quality too.

You can find them for about 15 bucks, or maybe even less.


Try www.eknifeworks.com
 
I second the CRKT Ryan.

Think about it , you're going to abuse (work :D) this knife worse than most of us on here do , do you really want to spend a lot on something that is going to a total beater ?
The only downside I can think of on the PlanB is the scales will gather gunk and junk with what you do for work.
Otherwise :thumbup:
 
Benchmade Tether knife--small neck knife, but definitely in your specs and cost range.

Becker Necker -- another neck knife (blade is 3.25 inches, the whole thing is slighty beyond your 6" limit. this one will last for years in your environs)

Hope this helps.
 
How about something from Peter Atwood? Do a Google and check his website out. Lots of cool stuff from Peter and the prices are about within your price range.
 
Get a decent work knife.. The Becker Necker or the Benchmade Instigator both canbe found for about $50 and then spend the rest on a Atwood product like the Prybaby or Bug Out Bar, they are better suited to prying tasks and can be carried on a keychain outside the shop... you knives will thank you.
 
MY Livesay Sniper is my EDC fixed blade (when I'm not in the office ;)

Great do anything knife that stays sharp as hell. Say what you want about Newt, He's a friend of mine and makes a hell of a knife.

Cheers,
--Dave
 
Ryan Plan B if it's going to get beat on a lot and if you misplace it it's no big heartbreak. The ange is great for openeing boxes and cutting tape. Becker Neck Knife is another good one for a few bucks more.
 
Also agree with Peter Atwood's products, I've had one of his Prybaby's for a couple of years now and it's the tops, the tops. In my opinion, a class by itself

Cheers,
--Dave
 
Benchmade 210 could be an option. Small but thick blade, it should stand up to prying whithout much of a problem. BM 220 would be another option if the 210 is smaller than you are looking for.

Otherwise go with one of Peter Atwoods tools that is specifically built for prying. I have a Prybaby on my keychain that I absolutely love.
 
I'm really liking Peter Atwood's stuff, glad someone mentioned him :)

I'm going to inquire about this little guy...

161465591smttrub1.jpg


And probably a Bug out Bar with my next paycheck. Thanks for all the suggestions! :)
 
You must log in or register to reply here.
Back
Top