SPFWant to thank all those who have helped make this Pre-Launch a success. Your support is greatly appreciated and has given me the Push needed to take this to the next level.
Appreciate all of the kind words and hope you enjoy your blades as much as I enjoyed making them!
One of the T-6 Fighters last two Prototype blades. The other is in the Gallery but needs to be Re-Shot and should be ready by next week.
Wanted to add a Bit of color so this one has Red Liners under the scales. Compound grind has been finalized IMO with a Flat False Edge, Convex Point and a Hollow Primary Edge. This design should address most of the issues that might cause a blade like this to fail. Remember it is a Knife not a Pry-bar, Axe or Hammer.
Blade is done in 3/16” O1 tool steel and is 5 7/8” tip to front of scales
11 ¼” OAL with the balance point right where the Lanyard hole is at the Ricasso just a touch blade heavy. Which is what I prefer. Patina finish over a 600grit Bead Blast
Carbon Fiber scales with red liners and Machine screw retention.
Please feel free to weigh in with “Constructive ideas” before the others hit the grinder!
T-6 Proto
Blade shot
Hand shot
Sheath
More detailed pics at the gallery link in my Signature line
$Delivered CONUS
PP Preferred gets it in the mail in two biz days after clearing. Shipped USPS Priority Mail with a Delivery confirmation. (No E-checks) USPS M/O ok just slower International buyers add $15US to cover extra shipping costs Please know your local Customs regulations
Price includes a Free 8-10oz handmade custom fitted leather sheath
Feel free to PM or Email any questions you may have, always try to answer within 24hrs or less.
Appreciate all of the kind words and hope you enjoy your blades as much as I enjoyed making them!
One of the T-6 Fighters last two Prototype blades. The other is in the Gallery but needs to be Re-Shot and should be ready by next week.
Wanted to add a Bit of color so this one has Red Liners under the scales. Compound grind has been finalized IMO with a Flat False Edge, Convex Point and a Hollow Primary Edge. This design should address most of the issues that might cause a blade like this to fail. Remember it is a Knife not a Pry-bar, Axe or Hammer.
Blade is done in 3/16” O1 tool steel and is 5 7/8” tip to front of scales
11 ¼” OAL with the balance point right where the Lanyard hole is at the Ricasso just a touch blade heavy. Which is what I prefer. Patina finish over a 600grit Bead Blast
Carbon Fiber scales with red liners and Machine screw retention.
Please feel free to weigh in with “Constructive ideas” before the others hit the grinder!
T-6 Proto
Blade shot
Hand shot
Sheath
More detailed pics at the gallery link in my Signature line
$Delivered CONUS
PP Preferred gets it in the mail in two biz days after clearing. Shipped USPS Priority Mail with a Delivery confirmation. (No E-checks) USPS M/O ok just slower International buyers add $15US to cover extra shipping costs Please know your local Customs regulations
Price includes a Free 8-10oz handmade custom fitted leather sheath
Feel free to PM or Email any questions you may have, always try to answer within 24hrs or less.
Last edited:
