• Happy Thanksgiving to all of you! I hope that you all have something to be grateful for this year and for many years to come
  • America has reached 250 years, and I am grateful to be here, in the best country in the world. Thank every one of you who helps make this country a better place, those who have gone before and risked it all, and those who've paid the ultimate price to make the United States what we are today.

    Happy Birthday America! Let Freedom Ring for all time!

Taking Handle off of Vietnam Tomahawk

Joined
Aug 6, 2007
Messages
58
I have a Vietnam Tomahawk from the American Tomahawk Company. It utilizes their very nice synthetic handle. I'm considering taking the head off and polishing it up.

It appears that you can unscrew the bolt on the top and remove the handle. Has anyone done this? How hard is it to get back on?

If it is not designed to be removed and re-installed I think I'll just leave things as is.

Thanks
 
they put it on with hydraulic pressure, unless something's changed.

if you get it off, have fun putting it back on, brother.

vec
 
they put it on with hydraulic pressure, unless something's changed.

if you get it off, have fun putting it back on, brother.

vec

I checked some of your photos, and it would seem you have managed to get a VT hawk head off, how much room is there to work with in the eye. (no i havn't seen one in person :) )
 
I checked some of your photos, and it would seem you have managed to get a VT hawk head off, how much room is there to work with in the eye. (no i havn't seen one in person :) )

i am sorry to say, they are inconsistent, brother.

we sort of "grow" the handles onto the hawks, so there are no pre-stressed areas in the handle - ya can't do that with (pure) wood or metal handles, so that's not a problem for us to make it strong - we just want to keep it as light as possible. - therein lies the challenge, plus we throw balance into the equation, which is nearly impossible to do with homogeneous handle materials, while relatively easy with composites....

brother 7.62 shooter had good luck putting a wooden handle on one of his - maybe i oughtta shut up and point ya at him - har!


that's also why we give the Happiness Guarantee - if you break it, you were either doing something extremely stupid, or were in an odd situation - we want to hear the story regardless - har! we consider ourselves a service - we just keep a hawk in your hands....

anyways, i am talking too much about the things i love, as usual...;

personally, i think the VN hawk was not a good design for a wood handle, due to the eye juncture, without some serious flips and twists in the build stage.

i guess they did it though. :thumbup:

the VNs were also too massive IMHO as a trained combatant - the early VTACs were lighter from what i have seen, i like them a lot more, especially oin a 24-inch handle, that can make use of the Impulse over the Inertia.



i think they average about 1/2" inch by 3/4" inches, give or take 1/8".

again, my experience is limited, ...but every one of the ATC VTACs i have held out of the handle, has varied significantly (to me at least) in mass, balance, and eye dimensions - they are all excellent, but they are also all different. - maybe that has changed with the new ones.

all my hawks get looked at under a magnifying glass, weighed by the gram, Centers of Mass noted, etc. - they are individuals to the last.


there are many ways to put a hawk together, this way is mine. :D

i figger if i am gonna fight with it, or depend on it in the wild, i don't want to doubt it.

been there, done that, the handle failed, so i went into the Hawk Biz....

rant off - going to bed to work off this flu my daughter gave me....

vec
 
I thought i posted a THANK YOU for the informative reply a week ago, must have missed the post button.

hope you kicked that bug by now. and thanks again
 
Back
Top