Selling two customs:
1) WITHDRAWN TBC Atlas CFL -- I'm not the original owner but looks like new to me. I haven't carried, cut or disassembled it. Gorgeous front flipper with textured Ti scales and pivot collars. Elmax blade riding on ceramic bearings. Great action and lock-up, and well-centered.
Comes with COA and generic soft taco pouch. Asking $600 obro TYD. WITHDRAWN.
2) Biryukov front flipper with Dama blade -- It’s in beautiful condition and features CF scales. Comes with a COA and a Biryukov-branded leather holder (which looks like it could fit on a belt). Riding on bearings.
I purchased this recently from a seller who advertised it as new and I don’t see a mark on it. It’s beautifully centered and has great lockup. It can be flipped with the thumb or index finger, although I find the detent light. I’ve not used or carried the knife.
Of note, I wanted to adjust the detent a little so easily slipped a T7 into the pivot screw only to immediately see that the pivot is non-captive (the T7 fit securely into the opening). I reached out to the seller, who reached out to Biryukov, and found out the pivot screws were set together with Loctite. Unfortunately, there’s no tool to hold the other side in place. Biryukov suggested I heat the pivot screws but, from what I’ve read, that might require a soldering iron and I’m not interested in trying that. So, off it goes. Two of the photos are of the pivot screws at 3x magnification (the screw without the Torx opening shows a reflection in the photo). Please ask me any questions about this prior to buying if you have any concerns.
This knife cost me just under $600. Asking $400 obro TYD.
10% discount for purchasing both knives. Payment via PPFF, Zelle, or Venmo, although you can reach out to me if PPGS is your only option. Knives will ship fully insured USPS or UPS. Thanks for looking. Cross-posted.
1) WITHDRAWN TBC Atlas CFL -- I'm not the original owner but looks like new to me. I haven't carried, cut or disassembled it. Gorgeous front flipper with textured Ti scales and pivot collars. Elmax blade riding on ceramic bearings. Great action and lock-up, and well-centered.
Comes with COA and generic soft taco pouch. Asking $600 obro TYD. WITHDRAWN.
2) Biryukov front flipper with Dama blade -- It’s in beautiful condition and features CF scales. Comes with a COA and a Biryukov-branded leather holder (which looks like it could fit on a belt). Riding on bearings.
I purchased this recently from a seller who advertised it as new and I don’t see a mark on it. It’s beautifully centered and has great lockup. It can be flipped with the thumb or index finger, although I find the detent light. I’ve not used or carried the knife.
Of note, I wanted to adjust the detent a little so easily slipped a T7 into the pivot screw only to immediately see that the pivot is non-captive (the T7 fit securely into the opening). I reached out to the seller, who reached out to Biryukov, and found out the pivot screws were set together with Loctite. Unfortunately, there’s no tool to hold the other side in place. Biryukov suggested I heat the pivot screws but, from what I’ve read, that might require a soldering iron and I’m not interested in trying that. So, off it goes. Two of the photos are of the pivot screws at 3x magnification (the screw without the Torx opening shows a reflection in the photo). Please ask me any questions about this prior to buying if you have any concerns.
This knife cost me just under $600. Asking $400 obro TYD.
10% discount for purchasing both knives. Payment via PPFF, Zelle, or Venmo, although you can reach out to me if PPGS is your only option. Knives will ship fully insured USPS or UPS. Thanks for looking. Cross-posted.
Last edited: