Ten Great knives From my Collection

Okay, I have read all the posts in this thread and particularly those attributed to Kohai999…….

Now my question to you "Mr. Kohai999" is Where is STeven and what have you done with him???:rolleyes:

Paul
 
sheathmaker said:
Okay, I have read all the posts in this thread and particularly those attributed to Kohai999…….

Now my question to you "Mr. Kohai999" is Where is STeven and what have you done with him???:rolleyes:

Paul
Click to expand...

You kill me, Pappy!!

Happy New Year.

Best Regards,

STevie
 
Nice pieces all around but that Mirabile Asian Bowie just plain tickles my fancy. Thanks for showing it because I've never seen it anywhere else.
 
STeven, thank you for creating this thread and taking the time to clearly articulate why each knife deserves attention. This sort of commentary is exactly what the custom knife world and this forum needs. I look forward to more posts of this style.
As an aside, have you considered making a similar thread with elements of traditional Japanese blade design while showing some of the contemporary makers who have either created exemplary traditional blades or interpreted the design elements successfully?
-Ivan
 
Ironwood666 said:
As an aside, have you considered making a similar thread with elements of traditional Japanese blade design while showing some of the contemporary makers who have either created exemplary traditional blades or interpreted the design elements successfully?
-Ivan
Click to expand...

I haven't.....that is a hard one.

In order to successfully pull that off the wall of words required would turn most average Forumites off halfway through, I think.

Will consider it.

Glad you liked the post. If you didn't notice....I left the last two free of commentary in the hopes that another Forumite might share why the THINK I posted those two knives.

Best Regards,

STeven Garsson
 
If that last post was directed at me-

I think you posted those JWS knives because he is a stand out in terms of a quality knife maker. I know personally how well made his knives are but haven't used one to the extent you probably have. I've carryed but not cut very much. You have always remarked on the quality of Johns edge and heat treat on the Evolution folder. I personally loved that folder because it felt great in the hand and was the only folder I owned that I never had to adjust. It worked PERFECTLY and was just fun to open and close.

If I recall correctly you had a great customer service experience with your beautiful pearl folder.

Now if your post was not directed at me, I can't help you. :)
 
Kohai999 said:
I haven't.....that is a hard one.

In order to successfully pull that off the wall of words required would turn most average Forumites off halfway through, I think.

Will consider it.

Glad you liked the post. If you didn't notice....I left the last two free of commentary in the hopes that another Forumite might share why the THINK I posted those two knives.

Best Regards,

STeven Garsson
Click to expand...

Well, even if it was dense, I believe that many would read it.

I have not handled enough customs to fully explore those last two knives, but that dagger struck me as an excellent example of a knife taking design cues from Japanese pieces in a totally different form from anything I have seen. The carved handle is precise and exquisite visually and the slight taper toward the middle of the handle visually balances the taper of the blade. The guard is embellished, but does not distract from the simplicity and flow of the piece. The size of the guard suits it perfectly. I particularly like the holes in the guard, as they give it a real visual lightness. I have no idea how the maker achieved that blade pattern, but the regular wave of the hamon contrasts with the randomness of the center, both of which in turn make the otherwise (deceptively) simple blade lively and interesting without distracting from the piece as a whole. The pommel is simple, but the carved ring cleanly ends the carving. The sheath is simple and utilitarian, and the sheath stamping mimics the pattern of the blade. All-in-all, the dagger is unique without being ostentatious and combines understated elegance with utility.

As a minor, I am not able to travel to shows, so the few customs I see in person are owned by local people and generally entry-level. I just wish I could see more of these knives in person.

-Ivan
 
I'd read your "wall of words" too. I was curious as well about what remarks you'd make about the JD Smith knife.
 
Jon Brand said:
If that last post was directed at me-
Click to expand...

It was not directed at you per se, Jon.
It was directed towards everyone.

I know what and how I see, but am always interested in how everybody else sees and what they see.

Best Regards,

STeven Garsson
 
Kohai999 said:
I know what and how I see, but am always interested in how everybody else sees and what they see.
Click to expand...

Funny, that's what I'd have said about it. It is your thread though, so I'd share my thoughts on JD's dagger- if only I could actually see the knife. The picture does allow me to notice that the steel is probably (knowing JD) ridiculously cool, and the handle carving is refined and comfortable/grippy looking.
 
Salem Straub said:
Funny, that's what I'd have said about it. It is your thread though, so I'd share my thoughts on JD's dagger- if only I could actually see the knife. The picture does allow me to notice that the steel is probably (knowing JD) ridiculously cool, and the handle carving is refined and comfortable/grippy looking.
Click to expand...

The blade is a 6 bar composite. There is no more room to comment beyond the specs I listed.

Hopefully, those who take the time to read the post will benefit from it.

Best Regards,

STeven Garsson
 
Last edited:
Ah, nice to see those specs edited in. Are you aware of more pics of that knife on the web anywhere? It is my favorite of the bunch.
 
Salem Straub said:
Ah, nice to see those specs edited in. Are you aware of more pics of that knife on the web anywhere? It is my favorite of the bunch.
Click to expand...

Sorry, that was custom built for me. The only photo of it besides the ones J.D. took are in the Darom book.

I don't like taking or posting photos of my knives.

Best Regards,

STeven Garsson
 
Did I miss something. I don't see a picture of JD,s dagger. Being an owner of several JD knives I am curious of the one you have.
Thanks, Gary
 
gthouse said:
Did I miss something. I don't see a picture of JD,s dagger. Being an owner of several JD knives I am curious of the one you have.
Thanks, Gary
Click to expand...

9th knife down Gary.

I got it one day before it was to be photgraphed for the book. Phil Lobred took the knives for me to where Eric Eggly was shooting them, in a brown paper Vons bag. :D

Two each from Jack Busfield, Phillip Baldwin, Don Fogg, Larry Fuegen, Harvey McBurnette and J.D. Smith. Still have them all exept one of the Baldwin pieces, buyer made me an offer that couldn't be refused.:(

Best Regards,

STeven Garsson
 
Last edited:
Thanks, I swear It was not there before. It must have been hiding from me. Very much like mine except I have more defined composite bar and oval pierced bronze guard. Thanks for sharing and the info. Bought at OKCA years ago.
Gary
 
The blade of the Lum tanto is really a sight to behold. The convex tip morphing into the keen angles of the edge and spine looks so kinetic, as if it was shaped by plunging point-first down from orbit.
 
Mecha said:
The blade of the Lum tanto is really a sight to behold. The convex tip morphing into the keen angles of the edge and spine looks so kinetic, as if it was shaped by plunging point-first down from orbit.
Click to expand...

That's one way to put it :)

Great thread Steven
 
I've really enjoyed the thread, knives and commentary. Hope to see more like it as well as the ones filled with your acidic, smart assery.
 
Odog27 said:
I've really enjoyed the thread, knives and commentary. Hope to see more like it as well as the ones filled with your acidic, smart assery.
Click to expand...

Probably more of those than this type....they take significantly less time.:D

Best Regards,

STeven Garsson
 
You must log in or register to reply here.
Back
Top