J. Hoffman
Knifemaker / Craftsman / Service Provider
- Joined
- Jan 1, 2011
- Messages
- 1,774
This is my Tenbruchs model. Full flat grind with a machine finish. The up-swept blade makes a great skinner.
Steel: AEB-L Stainless (61 Rc)
Handle: Westinghouse Crosscut Canvas
Hardware: Stainless Steel Corby Bolts
Sheath: RH Wickett & Craig English Bridle Leather
Grind: Full Flat
Finish: Machine Finish
OAL: 8"
Blade Length: 3-3/4"
$215
The Armagh .v2 is one of my paring knife models, but I have several requests for an EDC version, so I make it with a little thicker steel.
Steel: AEB-L Stainless (61 Rc)
Handle: Black Paper Micarta with vintage canvas micarta liners
Hardware: Canvas Micarta Pins
Sheath: Wickett & Craig English Bridle Leather w/ Pocket Clip
Grind: 20" Hollow
Finish: Stonewash
OAL: 7"
Blade Length: 3"
$180
The Lion Killer 85 is based off the knife used by Ranger Wolhuter to defend himself against a lion. This version is 85% the size of the original, and makes a very handy knife. It features a tapered Tang.
Steel: 50100 High Carbon (61 Rc)
Handle: Stabilized Leopard Wood
Hardware: Stainless Steel Corby Bolts
Sheath: Wickett & Craig English Bridle Leather
Grind: 20" Hollow
Finish: Machine
OAL: 8-3/8"
Blade Length: 4-3/8"
$215
I made my first knife in 2012. I'm a Voting Member of the Knifemakers' Guild, and a founding member and past officer of the Midwest Knifemakers' Guild. My knives have been featured in Blade, Knives Magazine, Knives Annual, TV, multiple podcasts and of course the internet. I pride myself on make a quality knife that will serve it's owner well. Prices include shipping in the US and any PP or credit card fees. I accept PP, money orders, cash, or checks. Questions and comments are welcome and appreciated.
Thanks
Jess Hoffman
Steel: AEB-L Stainless (61 Rc)
Handle: Westinghouse Crosscut Canvas
Hardware: Stainless Steel Corby Bolts
Sheath: RH Wickett & Craig English Bridle Leather
Grind: Full Flat
Finish: Machine Finish
OAL: 8"
Blade Length: 3-3/4"
$215
The Armagh .v2 is one of my paring knife models, but I have several requests for an EDC version, so I make it with a little thicker steel.
Steel: AEB-L Stainless (61 Rc)
Handle: Black Paper Micarta with vintage canvas micarta liners
Hardware: Canvas Micarta Pins
Sheath: Wickett & Craig English Bridle Leather w/ Pocket Clip
Grind: 20" Hollow
Finish: Stonewash
OAL: 7"
Blade Length: 3"
$180
The Lion Killer 85 is based off the knife used by Ranger Wolhuter to defend himself against a lion. This version is 85% the size of the original, and makes a very handy knife. It features a tapered Tang.
Steel: 50100 High Carbon (61 Rc)
Handle: Stabilized Leopard Wood
Hardware: Stainless Steel Corby Bolts
Sheath: Wickett & Craig English Bridle Leather
Grind: 20" Hollow
Finish: Machine
OAL: 8-3/8"
Blade Length: 4-3/8"
$215
I made my first knife in 2012. I'm a Voting Member of the Knifemakers' Guild, and a founding member and past officer of the Midwest Knifemakers' Guild. My knives have been featured in Blade, Knives Magazine, Knives Annual, TV, multiple podcasts and of course the internet. I pride myself on make a quality knife that will serve it's owner well. Prices include shipping in the US and any PP or credit card fees. I accept PP, money orders, cash, or checks. Questions and comments are welcome and appreciated.
Thanks
Jess Hoffman
