The Big Pre-Christmas Sale (Lots of Balisongs and Other Goodies)

J

Jimdo

Feedback: +39 / =0 / -0
Joined
May 26, 2005
Messages
915
Hello All, I'm mixing things up a bit here, so.... here we go...

Group 1 (All knives in this group are around 75% condition)

J1 : Parker Gypsy : $50.00
J2 : SKMTF Mountain Forge : $100.00
J3 : Valor Brass Figi : SOLD
J4 : Compass Industries : SOLD
J5 : Frost Brass Ninja I : $50.00




Group 2 (All knives in this group are around 75% condition)

J6 : Valor Channel : SOLD
J7 : Frost Dragon Channel : $100.00
J8 : Frost Brass Gypsy : $100.00
J9 : Frost Stainless Steel : $80.00




Non-Grouped

J10 : Parker Gypsy w/ Handmade Leather Sheath (Approx. 80 % Condition)
Heavy Duty knife, channel constructed. Reminds me of the Parker Custom Series Knives.
Price : $150.00







J11 : Parker Gypsy w/ Box (Approx. 80 % Condition)
Price : $100.00




J12 : Parker Gypsy w/ Box (Approx. 95 % Condition)
Price : $125.00




J13 : Parker - Imai #534 w/ Box (Approx. 95 % Condition)
Channel Brass Construction. Heavy Duty and Nice Knife, Rare find in this Condition.
Price : $125.00




J14 : Parker - Imai # 533 w/ Box (Approx. 90 % Condition)
Smaller Model of the #534.
Price : $100.00




J15 : Taylor Manila Folder # AK-1415 w/ Box (Approx. 95 % Condition)
Brass Bolsters and Stag Inserts
Price : $150.00




J16 : Taylor / Seto Manila Folder # G-972 w/ Box (Approx. 90 % Condition)
Brass Channel Construction w/ Stag Inserts
Price : SOLD




3. Extreme Ratio ‘EFA Pilot’

Specifications
Blade Steel : Bohler N690 Stainless Cobalt Steel (58HRC)
Blade Length : 4 1/2 in.
Closed Length: 5 7/8 in.
OAL Length Opened : 10 3/8 in.
Anticordal Aluminum Handles w/ integrated seat belt cutter
This knife features a locking mechanism to lock the liner into opened position thereby making the potentiality of accidentally closing the knife nearly impossible.
3/16 in. thick spine
The EFA PILOT knife is an emergency and survival tool requested by the Aeronautica Militare Italiana (Air Force) to equip the Italian pilots of the new Euro Fighter jets.
Condition Note: New in Box.
Price: $300.00




4. Brous Blades / Dustin Turbin Collaboration 'Strife Flipper'

Specifications
Blade Steel : D2 Tool Steel (59 – 61 RC)
Blade Length : 3 3/4 in.
Closed Length: 5 in.
OAL Length Opened : 8 3/4 in.
3D milled and contoured Carbon Fiber Scales attached to Skeletonized Titanium Liners.
This flipper features a Brous' ball bearing pivot system for an incredibly smooth opening and closing
.19 in. thick spine. This knife is 042 / 500.
Condition Note: 99 % Condition. There are some incredibly faint rub marks on the non presentation side of the blade (only visible under the right light). The last few pics demonstrate said marks. Comes with everything it came with from Jason Brous. Original Edge and sharp as a razor. Here's a really good review of the knife by Jim Skelton if your interested... ( https://www.youtube.com/watch?v=fya2dr0crVE )

Price: $425.00












8. Bradley Cutlery 'Kimura II' Balisong

Specifications
Blade Steel : 14C28N stainless steel
Blade Length : 3 3/4 in.
OAL Length Opened: 8 3/4 in.
OAL Length Closed : 5 in.
Skeletonized 410 Stainless Steel Handles
Condition Note : 99% Condition with Original Box and Papers. All American Made and Long Since Discontinued. A Great Knife for the money.
Price: SOLD




17. Bradley Cutlery 'Mayhem' Balisong

Specifications
Blade Steel : S30V Stainless Steel (RC 58-60)
Blade Length : 3 3/4 in.
OAL Length Opened: 8 1/2 in.
OAL Length Closed : 4 3/4 in.
6AL4V Bead Blasted Titanium Handles, All American Made. Long Since Discontinued.
Condition Note : Approx. 90 % of it's original condition. There's some signs of pocket carry and flipping and some unique marks where the zen pins hit the blade (as shown in the pics). Appears to be the unsharpened / original edge.
Price: $225.00






18. Pacific Cutlery International Series

Specifications
Blade Steel : 420 C Stainless
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Locks Closed, doesn’t Lock in Open Position.
Condition Note : This knife is at approx. 75 % condition. It has some chipping on the handles and some scratches on the blade, as shown in the pics.
Price: $125.00








19. Benchmade Model 239S BK

Specifications
Blade Steel : 12C27 Sandvik Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Zamak Channel Constructed Handles
Excellent Lock up in Open and Closed Positions.
Condition Note : This knife is at approx. 80% condition. It had been sharpened; it has several scratches on the blade and a few chips in the coating on the handles.
Price: $125.00







 
Last edited:
25. Benchmade 'Model 44 Balisong'

Specifications
Blade Steel : 12C27 Sandvik Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Stainless Steel Channel Constructed Handles
Excellent Lock up in Open and Closed Positions. Something worth noting is the grind towards the tip of this knife. I don't know if this was done by Benchmade or by someone else after Benchmade shipped the knife out. Worth noting is that it looks like it was done by the factory, I've taken pics of the area in question for the viewer to decide. I've been told it could be a Model 47 prototype but take that for what it's worth. If it was done after market, it's a very well done modification.
Condition Note : This knife is at approx. 95 % Condition.
Price: $450.00








29. Spyderco 'Spyderfly VG-10 Balisong'

Specifications
Blade Steel : VG-10 Stainless Steel
Blade Length : 4 1/8 in.
OAL Length Opened: 9 1/8 in.
OAL Length Closed : 5 in.
This is a fairly rare Spyderfly as it's in VG-10 blade steel. It features S.S. handles and hardware. It rides on a bushing and washer pivot system.
Condition Note : This knife is around 75% of its original condition. There are some scuffs and scratches on both the blade as well as the handles. There is also what appears to be light specks of rust on the blade. The handles appear to have a light patina on them, if magnified the pics capture this effect. Interestingly, the handles appear to be reversed as well, this is how I received the knife, so.... I left it this way. It's a good user grade knife. It functions and flips well (well, as well as a Spyderfly can flip).
Price: $300.00






30. Microtech 'Dragonfly Balisong'

Specifications
Blade Steel : 14-4CrMo Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 8 1/2 in.
OAL Length Closed : 4 1/2 in.
This knife was made in Jan. 2003, it comes with the original box, paper work, sheath and plastic. It features Anodized Aluminum Handles, an OD Green Coated Blade, and rides on Phosphorous Bronze Bushings and Washers.
Condition Note : This knife is in 99% + condition. It's in incredibly good shape for it's age. The only marks on the knife is one incredibly faint rub mark on the blade as seen in the pics and the small scuffs where the latch contacts the handle (also seen in the pics). Aside from those minute marks, it's dead mint.
Price: $400.00








31. SpyderCo 'SmallFly Balisong'

Specifications
Blade Steel : 154-CM Stainless Steel
Blade Length : 3 in.
OAL Length Opened: 7 in.
OAL Length Closed : 4 in.
This knife features S.S. Liners w/ a Digital Camo G-10 Overlay. It also features a S.S. Latch, Pocket Clip and Hardware. It rides on a bushing and washer pivot system.
Condition Note : This knife is in approximately 98% condition.. The only mark on the knife is a small 'ding' / 'knick' on the edge as seen in the pics and the small scuffs where the latch contacts the handle.
Price: SOLD






32. Benchmade Model 40 TR

Specifications
Blade Steel : 440C Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Titanium Handles
This is a rare Benchmade Model 40 TR, there weren’t a lot of these trainer balisongs made and as such, they’re pretty hard to come by. I picked this one up at Blade 2014.
Condition Note : This knife is around 95% of its original condition. There are very faint scuffs on the ‘blade’. It has the standard light chipping / flaking on the red coating where the latch comes into contact with the handles.
Price: SOLD







40. Pohl Force 'H3 Alpha 2 Back Lock Folder'

Specifications
Blade Steel : 440C Stainless Steel (RC 58-59)
Blade Length : 4 1/2 in.
OAL Length Opened : 10 in.
OAL Closed : 5 1/2 in.
This knife was designed and inspected by Deitmar Pohl and features S.S. Liners with thick 3-D contoured Zytel scales. It also features a closed back design with a Zytel backspacer, and slotted screw construction. The blade is coated in a black titanium / aluminum / nitride (TiAlN) PVD Coating. It is an absolute tank of a German Made knife.
Knife comes with original box and paper work as well as the protective zipper pouch and signed certificate of authenticity.
Condition Note : 100% NIB
Price : $245.00





44. Benchmade Model 45S

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This 45S comes with the original sheath. Solid lock up in both open and closed positions.
Condition Note : The Blade on this knife is in approximately 98% w/ the factory edge. The Handles, on the other hand, show some substantial signs of carry. I would rate them at 85%. There are no deep scratches but a lot of smaller / lighter scuffs and scratches which is indicative of pocket carry. A Spa trip would clean this knife up considerably.
Price: $325.00




46. Benchmade Model 45

Specifications
Blade Steel : 12c27 Sandvick Stainless Steel
Blade Length : 4 in.
OAL Length Opened: 9 in.
OAL Length Closed : 5 in.
Channel Constructed Stainless Steel Handles
This 45 comes with the original sheath. Solid lock up in both opened and closed positions.
Condition Note : The Blade on this knife is in approximately 99% condition but it has been resharpened. The Handles are in around 95% of original condition. Oddly, the latch is discolored, as seen in the pics.
Price: $375.00






As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.

All prices are inclusive of S&H in the U.S., there will be a 4% charge on PP, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.

It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.

I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.

First “I’ll take it” gets the cutlery.

My paypal address is : jj-guns (at) hot mail (dot) com

Only trades considered at this time would involve Custom Balisongs.

Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
 
Last edited:
The Kimura is SPF to : THE_RICASSO currently.
If the dea falls through you're next on the list.
 
Still have the Mayhem and am awaiting confirmation about the Kimmy (THE_RICASSO isn't able to make the purchase) and I am currently awaiting confirmation and payment from kyled1120. I will keep you updated as to what happens with him.
 
If it's still available, I'd like J12, Parker Gypsy bone balisong with box. And as a side note, that J9 Frost stainless steel with utility blade is the RAREST of the 1980s vintage Japanese import balisongs. I think they only made one short run of them back in 82 released to a select few dealers and I've never seen another for sale since . . . it wasn't even listed in the SMKW or Atlanta Cutlery catalogs. Some collector should snag that one.
 
If it is still available, I'll also take J13 : Parker - Imai #534 w/ Box (Approx. 95 % Condition)
Channel Brass Construction. Heavy Duty and Nice Knife, Rare find in this Condition.
Price : $125.00

So that is 250 total, minus 200 credit, equals 50 bucks plus whatever the adjustment for PayPal and insurance is. Let me know what the total is because I'm bad at math. Thanks. :)
 
Hello,
Yea, that one is still available as well.
Your math sounds right.
Total : $55.00 ($5 for PP and Ins).
 
Having a heck of a time finding this thread with the search function down. Thanks for sending tracking info. I reckon you can probably mark J12 and J13 sold now. :)
 
Last edited:
hey, is j8 still for sale? this was the first balisong i ever had, and mine got stolen, now that im much older id love to purchase a new one by christmas, is there any way you would come down a bit from $100 though? ive seen it listed but sold else where for $40 and i bought my original for $30 now that being said, i know what you want out of it and id be happy at $60 im in no way trying to low ball you, i can give you a link to where ive seen it sold for $40 http://www.allaboutpocketknives.com/aapk_stores/details.php?item=48838&store_id=909 please just let me know what you think.
 
You must log in or register to reply here.
Back
Top