Well, it finally happened - I got read the Riot Act over the number of knives in the house now that we have a baby daughter - and I will be selling off much of my collection in stages. These are all things I didn't think I'd be letting go.
All are in perfectly new condition, unless otherwise mentioned - if you're seeing marks on the blade, that's just protectant.
Prices are net to me (your choice of payment - doesn't have to be PP - but you cover any fees involved) and include shipping in the US (from DC).
McAhron 5" 3V balisong, with G10 over ti handles. $350. Here's one you won't see every day!
Adam Vigil tanto. 8" s35vn blade, black rayskin and iato wrap handle. Hammered brass guard and menuki. $275. This is the knife that Adam uses for his avatar on BF.
Richard Mok (RMoK) 12" bowie in s35vn with buckeye burl handle slabs. Made from thick steel stock (probably around 0.35") and convex ground. No sheath. This knife is featured on Richard's Facebook page, so you can assume he was proud of it. $275
Waterstones 9" 3V blade from 0.2" stock. Natural canvas micarta handles with red liners. $250. Very versatile large field knife.
Gillson 5.5" 3V knife, carbon fiber handles over lime green G10 liners. $220. This is from around 0.14" stock, but is full convex ground to provide for a very slicey, but still robust edge.
Shaerk's Knives Mook. 5" cutting edge, 0.2" 3V, but tapering to a good point. Coffee bag micarta handle with blue and gray G10 liners. $200. Very versatile blade.
Graf Knives R1 hawk. 3/8" 4340 steel. $175. This is a pure fighting model, modeled on a bronze age weapon. It is getting harder to get his hawks as he's not been so active recently. It came without scales. I've wrapped the handle in paracord and hockey tape (which I'll leave on unless the buyer prefers I remove it), but I'll also include screws for attaching a handle if you ever wanted to make one. SOLD
Graf Knives H1 hawk. 3/8" 4340 steel. $100. It is getting harder to get his hawks as he's not been so active recently. No sheath with this.
Joshua Gallardo AEBL gentleman's fixed blade. Handle is oak burl and green micarta, with a multicolored micarta spacer and black and white liners. Cutting edge length 3"; total length 7". $150
Gravelle Knives BIC. 5" 3V blade from around 0.20" stock. Black canvas micarta handle. A compact powerhouse with a lot of versatility. $180.
Adam Kornalski (Jamall) Knives Agor. 6" blade in 3/16" thick M390. Textured black G10 handle. $180. A couple of light sheathing marks.
Adam Kornalski (Jamall) Knives Bowie. 7" blade in 3/16" thick Elmax. Green canvas micarta handle. $180. A few sheathing marks.
Daniel Koster 3V Bushmaster with custom Al Welke sheath. I love the ample handle on this knife, but the fact that the tang is skeletonized, so that it is still very well balanced. Very versatile 5" blade with 4.5" cutting edge. $175
Osprey Knives Kestrel. $150. No sheath. 4" blade is from cpm154cm at around 3/16", but with a tapered blade and tang. It is ground very thin to make it a real slicer. Handle is a custom micarta. Osprey Knives is one of the spin-offs from Fiddleback Forge - i.e. one of Andy Roy's apprentices. SOLD
Tkrocky Bushcrafter. Tan micarta and spalted maple handle with thick blue liners. Kydex sheath. $150.
Here's the original sales post for better pictures - http://www.bladeforums.com/forums/showthread.php/1394631-Cpm-3v-bushcrafter
Trocky 4.5" 3V sheepsfoot, with tapered tang. $150
All are in perfectly new condition, unless otherwise mentioned - if you're seeing marks on the blade, that's just protectant.
Prices are net to me (your choice of payment - doesn't have to be PP - but you cover any fees involved) and include shipping in the US (from DC).
McAhron 5" 3V balisong, with G10 over ti handles. $350. Here's one you won't see every day!
Adam Vigil tanto. 8" s35vn blade, black rayskin and iato wrap handle. Hammered brass guard and menuki. $275. This is the knife that Adam uses for his avatar on BF.
Richard Mok (RMoK) 12" bowie in s35vn with buckeye burl handle slabs. Made from thick steel stock (probably around 0.35") and convex ground. No sheath. This knife is featured on Richard's Facebook page, so you can assume he was proud of it. $275
Waterstones 9" 3V blade from 0.2" stock. Natural canvas micarta handles with red liners. $250. Very versatile large field knife.
Gillson 5.5" 3V knife, carbon fiber handles over lime green G10 liners. $220. This is from around 0.14" stock, but is full convex ground to provide for a very slicey, but still robust edge.
Shaerk's Knives Mook. 5" cutting edge, 0.2" 3V, but tapering to a good point. Coffee bag micarta handle with blue and gray G10 liners. $200. Very versatile blade.
Graf Knives R1 hawk. 3/8" 4340 steel. $175. This is a pure fighting model, modeled on a bronze age weapon. It is getting harder to get his hawks as he's not been so active recently. It came without scales. I've wrapped the handle in paracord and hockey tape (which I'll leave on unless the buyer prefers I remove it), but I'll also include screws for attaching a handle if you ever wanted to make one. SOLD
Graf Knives H1 hawk. 3/8" 4340 steel. $100. It is getting harder to get his hawks as he's not been so active recently. No sheath with this.
Joshua Gallardo AEBL gentleman's fixed blade. Handle is oak burl and green micarta, with a multicolored micarta spacer and black and white liners. Cutting edge length 3"; total length 7". $150
Gravelle Knives BIC. 5" 3V blade from around 0.20" stock. Black canvas micarta handle. A compact powerhouse with a lot of versatility. $180.
Adam Kornalski (Jamall) Knives Agor. 6" blade in 3/16" thick M390. Textured black G10 handle. $180. A couple of light sheathing marks.
Adam Kornalski (Jamall) Knives Bowie. 7" blade in 3/16" thick Elmax. Green canvas micarta handle. $180. A few sheathing marks.
Daniel Koster 3V Bushmaster with custom Al Welke sheath. I love the ample handle on this knife, but the fact that the tang is skeletonized, so that it is still very well balanced. Very versatile 5" blade with 4.5" cutting edge. $175
Osprey Knives Kestrel. $150. No sheath. 4" blade is from cpm154cm at around 3/16", but with a tapered blade and tang. It is ground very thin to make it a real slicer. Handle is a custom micarta. Osprey Knives is one of the spin-offs from Fiddleback Forge - i.e. one of Andy Roy's apprentices. SOLD
Tkrocky Bushcrafter. Tan micarta and spalted maple handle with thick blue liners. Kydex sheath. $150.
Here's the original sales post for better pictures - http://www.bladeforums.com/forums/showthread.php/1394631-Cpm-3v-bushcrafter
Trocky 4.5" 3V sheepsfoot, with tapered tang. $150
Last edited:
