Several nice blades for trade.
Looking for fixed blades in CPM 3V or Magnacut, but my primary trade interests would be as follows...
NO SERRATIONS
1. Spyderco Military in M390 or 204P
2. Microtech Crosshair non-serrated in M390 (black or green)
3. Busse BA-E (used is fine prefer black/gray/green micarta)
4. TRC Mille Couri
5. Microtech Socom Elite Manual
6. Buckmaster 184 (I'm not some super collector... but I prefer the model with the big BUCKMASTER stamp)
7. Gransfors Bruks Broad Axe
8. Spyderco Yojumbo S90V Carbon Fiber Sprint
9. Demko AD20 in 3V Sharksfoot.
10. Strider SMF in 3V
11. Cool Short Swords I didn't know I needed.
12. LEM Dual Grind Big Bit Meat Grinder (New)
13. SNS Deluxe Charcoal Grill (New)
12. Yamaha Aventage RX-A2A 7.1 Receiver
1. SYKCO 1311 with .125" kydex Buy Brown sheath. Unused. Comes with Buy Brown heavy kydex sheath. Sheath is TIGHT... so it will require some use to loosen up.
2. Ben Tendick BRT Bladeworks Valkyrie Axe. Unused, gray terotuf scales with titanium tubes, black kydex sheath. Incredibly tough 4150 steel.
3. Ben Tendick Aikuchi in 3V with antique dragon menuki. Comes with kydex sheath.
4. Spyderco Military NIB, Sprint Run S90V blade, Titanium Frame Lock with Carbon Fiber show side scale.
5. Spyderco St. Nicks PM2 in 4V. Unused but I did test fit a pair of RGT titanium scales on it. Those can be made available as well.
6. Microtech Combat Troodon Bounty Hunter. Unused with box.
7. Microtech Stitch. Light carry. Hardly used. Factory edge and box.
8. Unused PM2 Wharnie CTS-XHP satin
9. (TRADED)Got an older Laconico fixed blade. Blade is 5160 and is around 5.5" if memory serves me. I'll get a more exact measurement tonight. Knife has been used and sharpened. It's very sharp. Has some wear marks here and there. I made an ugly kydex sheath for it as it didn't come with one. I also removed a little material on the handle scale where the index finger rests to make it a little more comfortable. It looks worse than it is in the pic. If you know how to polish G10 you can make it go away.(TRADED)
10. Cold Steel Master Tanto 3V. Unused in box... I did move the little belt strap thing... but otherwise it has just sat on the shelf.
11. NIB Cold Steel Chaos Dagger.
12. Titanium Franken-Military. This was put together from 2 different Millies. Blade is relatively unused. Clip has mild wear. And the frame has carry wear but nothing serious. No box. Lockup is solid and tight. Centering is perfect. Rock solid build and looks sexy to boot.
13. Orange Military Sprint. Older model. It's a user. Has scratches on the blade. Has the tiniest little chip in the edge down near the kick. Just received a razor sharp sharpening job by me. The tiny chip will likely sharpen out the next time it needs to be resharpened. Can get closer pic if there is real interest. Got no problem just keeping this one. It's a classic.
14. PM2 in 204P. Light carry, still has factory edge. Box and all with it. It has a titanium back spacer right now... it can stay for the right trade.
Looking for fixed blades in CPM 3V or Magnacut, but my primary trade interests would be as follows...
NO SERRATIONS
1. Spyderco Military in M390 or 204P
2. Microtech Crosshair non-serrated in M390 (black or green)
3. Busse BA-E (used is fine prefer black/gray/green micarta)
4. TRC Mille Couri
5. Microtech Socom Elite Manual
6. Buckmaster 184 (I'm not some super collector... but I prefer the model with the big BUCKMASTER stamp)
7. Gransfors Bruks Broad Axe
8. Spyderco Yojumbo S90V Carbon Fiber Sprint
9. Demko AD20 in 3V Sharksfoot.
10. Strider SMF in 3V
11. Cool Short Swords I didn't know I needed.
12. LEM Dual Grind Big Bit Meat Grinder (New)
13. SNS Deluxe Charcoal Grill (New)
12. Yamaha Aventage RX-A2A 7.1 Receiver
1. SYKCO 1311 with .125" kydex Buy Brown sheath. Unused. Comes with Buy Brown heavy kydex sheath. Sheath is TIGHT... so it will require some use to loosen up.
2. Ben Tendick BRT Bladeworks Valkyrie Axe. Unused, gray terotuf scales with titanium tubes, black kydex sheath. Incredibly tough 4150 steel.
3. Ben Tendick Aikuchi in 3V with antique dragon menuki. Comes with kydex sheath.
4. Spyderco Military NIB, Sprint Run S90V blade, Titanium Frame Lock with Carbon Fiber show side scale.
5. Spyderco St. Nicks PM2 in 4V. Unused but I did test fit a pair of RGT titanium scales on it. Those can be made available as well.
6. Microtech Combat Troodon Bounty Hunter. Unused with box.
7. Microtech Stitch. Light carry. Hardly used. Factory edge and box.
8. Unused PM2 Wharnie CTS-XHP satin
9. (TRADED)Got an older Laconico fixed blade. Blade is 5160 and is around 5.5" if memory serves me. I'll get a more exact measurement tonight. Knife has been used and sharpened. It's very sharp. Has some wear marks here and there. I made an ugly kydex sheath for it as it didn't come with one. I also removed a little material on the handle scale where the index finger rests to make it a little more comfortable. It looks worse than it is in the pic. If you know how to polish G10 you can make it go away.(TRADED)
10. Cold Steel Master Tanto 3V. Unused in box... I did move the little belt strap thing... but otherwise it has just sat on the shelf.
11. NIB Cold Steel Chaos Dagger.
12. Titanium Franken-Military. This was put together from 2 different Millies. Blade is relatively unused. Clip has mild wear. And the frame has carry wear but nothing serious. No box. Lockup is solid and tight. Centering is perfect. Rock solid build and looks sexy to boot.
13. Orange Military Sprint. Older model. It's a user. Has scratches on the blade. Has the tiniest little chip in the edge down near the kick. Just received a razor sharp sharpening job by me. The tiny chip will likely sharpen out the next time it needs to be resharpened. Can get closer pic if there is real interest. Got no problem just keeping this one. It's a classic.
14. PM2 in 204P. Light carry, still has factory edge. Box and all with it. It has a titanium back spacer right now... it can stay for the right trade.
Last edited:
