aznpos531
I like sharp and pointy things...
- Joined
- Dec 12, 2010
- Messages
- 1,176
Finally got a gold membership!! So this would be my first sale thread! 
I've decided to thin out my collection to make room (and funds!!!) for some new knives. So here we go!
Gen 3 Hinderer 3" XM-18 Flipper
I was really hoping to trade this one for a damascus Sebenza but I've got one on the way so up for sale this one goes! Had the knife for over a month now and it's not really seeing much action. As much as I love this knife, I'm more of a Sebenza kinda guy.
The previous owner took good care of the knife and I've only carried it twice. The blade has some very light cosmetic scuffs that probably won't show up in pictures.
Here are some specs:
Steel: Duratech 20cv
Finish: Beadblasted blade and stonewashed lockside Ti
Scale: Tan G10
Hardware: old style rounded screws
It's a flipper model and has very early lockup that's solid as they come with perfect blade centering.
I'm asking$650 $640 $625 Sold!! shipped to anywhere in North America. Overseas contact me for actual shipping costs.
Cold Steel AK-47 (Old-style w/ Ultra Lock)
This is a BNIB Cold Steel AK-47; never carried or used. Factory edge, never sharpened. It's the old style one with the Ultra Lock. Blade is teflon coated AUS-8A. Handle is very aggressive black G-10. Asking$65 $60 $55 shipped to anywhere in North America
Spyderco Tenacious
BNIB Spyderco Tenacious, never carried or used. Factory edge, never sharpened. Satin finish 8Cr13MoV blade. Handle is black G-10. Asking$35 SOLD! shipped to anywhere in North America.
Ontario RAT-1
BNIB Ontario RAT-1, never carried or used. Factory edge, never sharpened. Black coated AUS-8 blade. Handle is black FRN. Asking$40 $35 shipped to anywhere in North America.
Spyderco Lot - Native, Delica, Dragonfly
Got these used as a partial trade a while ago and I haven't touched them since I got them. All three knives are fully serrated. They're well used but still some use left in them. Native is S30V steel with FRN handles. Both the Delica and Dragonfly are VG-10 steel with stainless steel handles. The previous owner broke the tip on the Native and reground a rough tip (see pictures). Asking$80 $75 $70 $65 shipped to anywhere in North America.
Cold Steel Ti-Lite 6"
BNIB Cold Steel Ti-Lite, never used or carried. Factory edge, never sharpened. This is the 6" model with zytel handle scales and AUS-8A steel. Asking$75 $70 $65 $60 shipped anywhere in North America.
Boker + Meyerco
Both BNIB, I've got a Boker Magnum Bulldog and a Meyerco Necklance. The Boker has black G10 handles and 440C stainless steel blade; liner lock. The Meyerco has FRN handles and sheath, 440C blade. Asking$35 $25 shipped anywhere in North America.
The only trades I would consider would be for CRK knives and accessories. I'm specifically looking for a Ti clip insert for a Large Sebenza, new unused calfskin pouch and CRK wallet.
Buy more than one and I'll cut you a deal on combined shipping costs. Overseas buyers please contact me for shipping costs.
Email is the fastest way to get a response. I'm not always at my computer so please be patient. I'll try my best to get back to you in a timely manner.
I prefer EMT for payment but will also gladly accept paypal +3.5%.
No sales to minors (18+). All local laws and regulations must be observed by the buyer. Buyer assumes all risk once knife has been shipped. I reserve the right to refuse sale to anyone for any reason. I further reserve the right to withdraw any knife listed without prior notification.
I've decided to thin out my collection to make room (and funds!!!) for some new knives. So here we go!
Gen 3 Hinderer 3" XM-18 Flipper
I was really hoping to trade this one for a damascus Sebenza but I've got one on the way so up for sale this one goes! Had the knife for over a month now and it's not really seeing much action. As much as I love this knife, I'm more of a Sebenza kinda guy.
The previous owner took good care of the knife and I've only carried it twice. The blade has some very light cosmetic scuffs that probably won't show up in pictures.
Here are some specs:
Steel: Duratech 20cv
Finish: Beadblasted blade and stonewashed lockside Ti
Scale: Tan G10
Hardware: old style rounded screws
It's a flipper model and has very early lockup that's solid as they come with perfect blade centering.
I'm asking
Cold Steel AK-47 (Old-style w/ Ultra Lock)
This is a BNIB Cold Steel AK-47; never carried or used. Factory edge, never sharpened. It's the old style one with the Ultra Lock. Blade is teflon coated AUS-8A. Handle is very aggressive black G-10. Asking
Spyderco Tenacious
BNIB Spyderco Tenacious, never carried or used. Factory edge, never sharpened. Satin finish 8Cr13MoV blade. Handle is black G-10. Asking
Ontario RAT-1
BNIB Ontario RAT-1, never carried or used. Factory edge, never sharpened. Black coated AUS-8 blade. Handle is black FRN. Asking
Spyderco Lot - Native, Delica, Dragonfly
Got these used as a partial trade a while ago and I haven't touched them since I got them. All three knives are fully serrated. They're well used but still some use left in them. Native is S30V steel with FRN handles. Both the Delica and Dragonfly are VG-10 steel with stainless steel handles. The previous owner broke the tip on the Native and reground a rough tip (see pictures). Asking
Cold Steel Ti-Lite 6"
BNIB Cold Steel Ti-Lite, never used or carried. Factory edge, never sharpened. This is the 6" model with zytel handle scales and AUS-8A steel. Asking
Boker + Meyerco
Both BNIB, I've got a Boker Magnum Bulldog and a Meyerco Necklance. The Boker has black G10 handles and 440C stainless steel blade; liner lock. The Meyerco has FRN handles and sheath, 440C blade. Asking
The only trades I would consider would be for CRK knives and accessories. I'm specifically looking for a Ti clip insert for a Large Sebenza, new unused calfskin pouch and CRK wallet.
Buy more than one and I'll cut you a deal on combined shipping costs. Overseas buyers please contact me for shipping costs.
Email is the fastest way to get a response. I'm not always at my computer so please be patient. I'll try my best to get back to you in a timely manner.
I prefer EMT for payment but will also gladly accept paypal +3.5%.
No sales to minors (18+). All local laws and regulations must be observed by the buyer. Buyer assumes all risk once knife has been shipped. I reserve the right to refuse sale to anyone for any reason. I further reserve the right to withdraw any knife listed without prior notification.
Last edited:
