Three Awesome Little EDC Blades from SRG Knives

S

SRG Knives

Feedback: +4 / =0 / -0
Joined
Jun 21, 2013
Messages
130
Hello my name is Justin and i'm just getting into making knives. Im going to try and sell a few today. All three knives are made from D2 steel and HT to 59-60 Nitrogen quenched. They hold an amazing edge. I sent a knife i made around to a few knife nuts on youtube for review, after all of them testing out the blade and cutting tons of cardboard, it came back just as sharp as it left. All blades are from 6 1/2" to 6 3/4" long and 2" wide. The weight on these beauties are from 6-8OZ little heavy from can really perform and have a edge that can pop paracord. With the thickness being 1/4" they cut like they are half the thickness and are twice as strong. I have medium to large hands and they fit beautifully in my hand. All the handles are CC and the G10 is beadblasted for grip. The leopard wood is smooth and polished nicely and buffed. All the blades are taken up to 220 grit and scotch bright and buffed. If you are worried about the D2 Rusting, I have left them in the damp workshop for days with no oil and had no rusting or specks of rust. If you would like to purchase one or ask any questions feel free to email at srgknives@gmail.com or pm or post down below. Also all the knives come with a kydex sheath. The tanto has a CF kydex sheath, bowie Has a black kydex sheath, Drop point has a 1/2 black 1/2 OD Green kydex sheath. The tanto have a mirror polished tip. All prices include shipping to Canada and USA. The mirror tanto had a FFG on one side.

Mirror tanto $110
Drop Point $100
Bowie $130






 
I can't stop looking at these small blades! You did a really good job on these, Justin. :thumbup:
 
It is hard for me to tell from the pic....is that Tanto chisel ground or v-edged ? Thanks - great looking work ! ;)
 
You must log in or register to reply here.
Back
Top