- Joined
- Aug 31, 2011
- Messages
- 3,074
All prices include Priority Shipping TYD anywhere in the USA. I cannot ship to other countries.
Steel is A2 from Alpha Knife Supply
Heat treatment is by Peters' for a hardness of 61 RC
Sheaths are made of 7-8 oz vegetable tanned leather. the edges are treated with Roll Call edge dressing followed by Sno-Seal. The insides are treated with Sno Seal as far in as I can reach my finger in there. The other parts are protected by Saddle Lac spray lacquer.
Handles are glued together with West Systems marine-grade epoxy (G-Flex).
My process is hand-eye guided; no CNC or jigs. Sharpening is free-handed
Top Knife - Skinner - SOLD
The blemish on this one is not visible in the pictures: it is discoloration from heat treatment, on the left-side ricasso.
Blade 3 11/16"
Overall Length 7 5/8"
Blade Thickness .095" in the ricasso.
Handle is Zebrawood with a rubbed tung oil finish and micarta pins
Middle Knife SPF - Cowboy - SOLD:
Blade 3 1/4"
Overall Length7 3/16"
Blade Thickness .100" in the recasso.
Handle is Richlite with micarta pins and thong tube
Bottom Knife -Bird and Trout - SOLD:
Blade 3 3/4"
Overall Length 8"
Blade Thickness .094"
Handle is stabilized spalted beechwood which has been sanded to 1500 grit and then buffed.
Skinner is SOLD. Cowboy knife is SPF. Asking $75 for the Bird and Trout. PayPal is preferred.
Steel is A2 from Alpha Knife Supply
Heat treatment is by Peters' for a hardness of 61 RC
Sheaths are made of 7-8 oz vegetable tanned leather. the edges are treated with Roll Call edge dressing followed by Sno-Seal. The insides are treated with Sno Seal as far in as I can reach my finger in there. The other parts are protected by Saddle Lac spray lacquer.
Handles are glued together with West Systems marine-grade epoxy (G-Flex).
My process is hand-eye guided; no CNC or jigs. Sharpening is free-handed
Top Knife - Skinner - SOLD
The blemish on this one is not visible in the pictures: it is discoloration from heat treatment, on the left-side ricasso.
Blade 3 11/16"
Overall Length 7 5/8"
Blade Thickness .095" in the ricasso.
Handle is Zebrawood with a rubbed tung oil finish and micarta pins
Middle Knife SPF - Cowboy - SOLD:
Blade 3 1/4"
Overall Length7 3/16"
Blade Thickness .100" in the recasso.
Handle is Richlite with micarta pins and thong tube
Bottom Knife -Bird and Trout - SOLD:
Blade 3 3/4"
Overall Length 8"
Blade Thickness .094"
Handle is stabilized spalted beechwood which has been sanded to 1500 grit and then buffed.






Skinner is SOLD. Cowboy knife is SPF. Asking $75 for the Bird and Trout. PayPal is preferred.
Last edited: