- Joined
- Dec 13, 2006
- Messages
- 2,415
This is my classic drop point hunter in A2 blade flat ground with heat treat by Paul Bos. A2 is a high carbon (1.00 %) tool steel with a small amount of chrome (5.2%) for corrosion resistance. Thickness is 3/32 overall length is 8" and at widest point about 1.5".
The blade is flat ground and finished w/fine scotchbrite. The edge is ground to about 0.015 and convex with a cutting angle of about 12 degrees to make it a real slicer.
These knives are real cutters .. See similar slice in the link below..............
http://s141.photobucket.com/albums/r65/pcrknives/?action=view¤t=HPIM2346.flv
All three have colored fiber spacers (see pic 3), your choice Quilted Sapele (figure really does not show well in pics), Black Linen Micarta, or Ivory Linen Micarta. All attached with stainless Colby Bolts
All sold, thanks everyone
$125.00 postage in US included and sheath thanks everyone
I need to charge a little more for outside US.
I prefer paypal but flexable on payment method.
The blade is flat ground and finished w/fine scotchbrite. The edge is ground to about 0.015 and convex with a cutting angle of about 12 degrees to make it a real slicer.
These knives are real cutters .. See similar slice in the link below..............
http://s141.photobucket.com/albums/r65/pcrknives/?action=view¤t=HPIM2346.flv
All three have colored fiber spacers (see pic 3), your choice Quilted Sapele (figure really does not show well in pics), Black Linen Micarta, or Ivory Linen Micarta. All attached with stainless Colby Bolts
All sold, thanks everyone
$125.00 postage in US included and sheath thanks everyone
I need to charge a little more for outside US.
I prefer paypal but flexable on payment method.
Last edited:
great looking knives man...:thumbup:
