Tired of These Sitting Around -- RePosts with Price Drops

Big Chris

Big Chris

SAHD/Knifemaker
Knifemaker / Craftsman / Service Provider
Feedback: +124 / =0 / -0
Joined
Apr 1, 2010
Messages
3,273
Harpoon SAR
IMG_1418.jpg


IMG_1419.jpg


IMG_1420.jpg


IMG_1421.jpg


IMG_1422.jpg


IMG_1417.jpg


There are some scratches present from being inserted and pulled from the sheath.

.220 CPM 3V
10.94" OAL
5.85" blade
1.6" wide at the plunge
1.9" wide at the widest
High flat grinds
Ht by me with cryo to 60 Rc
Highly contoured handles for comfort
Black canvas micarta over orange G10 liners
Aluminum pins and tubes
Comes with a black pancake Kydex sheath, large tek-lok compatible


This knife is incredibly comfortable and surprisingly light in the hand


Asking $SOLD


Pot Belly
IMG_1552.jpg
IMG_1553.jpg


IMG_1554.jpg
IMG_1551.jpg


I think that this knife could really bridge the gaps and become a great multipurpose knife. Lots of thin cutting edge. The tall blade profile gives extra stiffness lost with the thinner stock. This knife could find a great home as a small camp knife, skinning knife, companion for a light campout, or just a great all-around user.

Specs:
.140" CPM 3V
9" OAL
4.375" Blade
1.6" Wide at Plunge and 1.81" Wide at Widest
Full Flat Grind
Natural Canvas Scales with White G10 Liners
Aluminum Pins and Tube
Deep Pouch Leather Sheath by Me

Asking $240 220


Magnum Hunter
IMG_1992.jpg


IMG_1995.jpg


IMG_1993.jpg


IMG_1996.jpg


IMG_1994.jpg


IMG_1990.jpg


Sorry for the below average pics, I don't want to carry the knife out into the cold and snow.

There are some scratches present from being pulled and inserted from the sheath.

Specs:
.095" ELMAX
10.125" OAL
5.56" Blade
1.375" Wide
Very High Flat Saber Grind For Increased Cutting Ability
Heat Treat by Me with Double Cryo to a 61-62 Rc
Black and Toxic Layered G10 Scales
Sculpted and Contoured Handle Melts into Your Hand
Carbon Fiber Pins and Tube
Large Tek-Lok Compatible Pancake Kydex Sheath

Asking $ SOLD

Price includes shipping via USPS Priority Mail to all 50 states with USPS tracking, others can contact for additional shipping charges.

I accept Paypal, money order, or check. Paypal preferred to bigchriscustomknives@gmail.com.

First, "I'll take it," gets it.

Feel free to email any questions/comments to bigchriscustomknives@gmail.com.

Thanks for looking!
Big Chris
 
Last edited:
Skinner
IMG_1848.jpg
IMG_1849.jpg


IMG_1850.jpg
IMG_1846.jpg


Specs:
.125" CPM D2
8.5" OAL
3.937" Blade
Flat Saber Ground
Heat Treat and Cryo by Me to 61 Rc
Buckeye Burl Scales with Blue G10 Liners
Aluminum Pins and Tube
Hand Sewn Leather Sheath by Me

Asking $SOLD


Scandi

IMG_1624.jpg
IMG_1625.jpg


IMG_1626.jpg
IMG_1623.jpg


Specs:
1/8" O1
8.875" OAL
4.375" Blade
Zero Scandinavian Grind
Wide Tang for Added Durability
Stainless Guard with a Pinned & Peened Butt Cap
Black and Forest Green G10 Spacers
Stacked Leather Handle
Hand Sewn Leather Sheath by Me

Asking $SOLD


Flat Grind

IMG_1620.jpg
IMG_1621.jpg


IMG_1622.jpg
IMG_1619.jpg


Specs:
1/8" O1
8.85" OAL
4.375" Blade
Flat Saber Grind
Wide Tang for Added Durability
Stainless Guard with a Pinned & Peened Butt Cap
Black and Blue G10 Spacers
Stacked Leather Handle
Hand Sewn Leather Sheath by Me

Asking $SOLD


Prices include shipping via USPS Priority Mail to all 50 states with delivery confirmation, others can contact for additional shipping charges
I accept Paypal, money order, or check. Paypal preferred to bigchriscustomknives@gmail.com.

Contact me for a group discount.

First, "I'll take it," gets it.

Feel free to email any questions/comments to bigchriscustomknives@gmail.com.

Thanks for looking!
Big Chris
 
Last edited:
Reverse Tanto Long Knife
You will be amazed at the cutting power of this knife.
IMG_1760.jpg
IMG_1761.jpg


IMG_1762.jpg
IMG_1759.jpg


Specs:
1/8" CPM S90V
10.4" OAL
5.45" Blade
Full Zero Convex Grind
Heat Treat to 60 Rc with Cryo
Hidden Tang Construction - Tang is same width as the blade and extends past the second pin.
Aluminum Pins
Includes Kydex Sheath Large Tek-Lok Compatible

$SOLD SPF

Slicer/Light Machete
DSCN1685.jpg
DSCN1686.jpg


DSCN1687.jpg


I originally designed this knife to have a home as a kitchen slicer. However, with the exceptional toughness and edge stability of CPM 3V, I decided to give it a try in the bush. I did some tree trimming around the house and used this knife to clean up the smaller branches (under 1" in diameter). The thin edge I originally ground this to makes it a breeze slicing in the kitchen. It glides through meat without any resistance and it performed admirably on light, green vegetation. This knife is not meant to be a heavy woods chopper nor the end all survival knife for your bug out bag. But if you want the most awesome slicer for that BOB this is the tool for you. Obviously, it has been used by me around the house. I am looking to thin the herd so I can add a new toy to the arsenal or my wife will yell at me for trying to keep all of the knives I make.

Specs:
.147 CPM 3V
14.8" OAL
9.9" blade
1.5" wide
Ht by Peters to 60 Rc
It is FFG to a thin convex edge
Camo canvas micarta scales
Two aluminum tubes, two aluminum pins
Includes OD Taco Kydex Large Tek-Lok Compatible
Asking $SOLD

This knife is a very early knife in my making. It has some cosmetic character. It is a true user.

Price includes shipping via USPS Priority Mail to all 50 states with delivery confirmation, others can contact for additional shipping charges
I accept Paypal, money order, or check. Paypal preferred to bigchriscustomknives@gmail.com.

First, "I'll take it," gets it.

Feel free to email any questions/comments to bigchriscustomknives@gmail.com.

Thanks for looking!
Big Chris
 
Last edited:
If I had even half the amount laying around i would pick up that stacked leather scandi and find a way to make funds work out! That's a great deal! Someone will be pleased!
 
Bruce Culberson said:
That flat ground stacked leather handle knife is sweet Chris! Reminds me of my granfather's hunting knife......
Click to expand...

Thanks Bruce. I really do love a Kephart styled knife. If that one was in another steel with a bulkier handle I probably would have kept it.
 
WoW i do not normally remark in these threads because I find that it makes them look cluttered. That being said, your potbelly looks amazing, sometime soon I will save up the cash for one, would look good on my belt, would you make another if that one sells? is so my email is jeffmatchim@gmail.com
 
Hey Big Chris....

i'm looking for something and your Harppon SAR may fit the bill. Specifially a roughly 6 to 7 inch blade, drop point (kind of like you practical tactical), high saber/flat grind, and a contoured micarta handle. I was going to contact you about making me such a knife, but if you are willing, I would love to help you clear out your old inventory. What I am asking is if you would be willing to reprofile the spine of the Harpoon and remove the barb, something like this....



I don't mean this request in any way to be disrespectful of the design of the Harpoon, i'm just looking for an even flat spine all the way to the tip. The Harpoon's width, thichness, and grind are all what I'm looking for. No sense in making a new knife if modding an existing one would work. If youre willing, count me in for an "I'll take It" for the Harpoon SAR. I understand too if you say no. This request is sort of like asking Michelangelo to redo some of the Sistine Chapel.
 
Munzer said:
Hey Big Chris....

i'm looking for something and your Harppon SAR may fit the bill. Specifially a roughly 6 to 7 inch blade, drop point (kind of like you practical tactical), high saber/flat grind, and a contoured micarta handle. I was going to contact you about making me such a knife, but if you are willing, I would love to help you clear out your old inventory. What I am asking is if you would be willing to reprofile the spine of the Harpoon and remove the barb, something like this....



I don't mean this request in any way to be disrespectful of the design of the Harpoon, i'm just looking for an even flat spine all the way to the tip. The Harpoon's width, thichness, and grind are all what I'm looking for. No sense in making a new knife if modding an existing one would work. If youre willing, count me in for an "I'll take It" for the Harpoon SAR. I understand too if you say no. This request is sort of like asking Michelangelo to redo some of the Sistine Chapel.
Click to expand...

That could very easily be done, but not at the $205 price. Thanks for your interest.
If you would like to request a custom order for a knife please email me at the address in my signature.
BTW, my standard SAR has the exact tip /spine profile you want.
 
Chris - I'll take the long s90v blade. You might need to hang onto it for a little while, though, as I'm heading out of country on Saturday for 3 weeks. Can pay now, of course.
 
Brummie said:
Chris - I'll take the long s90v blade. You might need to hang onto it for a little while, though, as I'm heading out of country on Saturday for 3 weeks. Can pay now, of course.
Click to expand...

Thanks, It is yours. I have no problem holding it for you.
 
You must log in or register to reply here.
Back
Top