Tomahawk hafts

[Shotgun]

I was wondering if tomahawk hafts were all generally the same shape. I've been thinking about getting a custom but would like the ability to get hafts from any vendor. They all run about the same?

 

[JackHammer]

From my experience they tend to have the same shape but are not all the same size. I am putting 2 Craig Barr 52100 hawks together and have 19" hafts that are the right fit. But I also want 22" hafts and the only ones I found online are made for CS hawks, so I bought 2 and now I have a lot of sanding to do!

 

[Prophet118]

From my experience they tend to have the same shape but are not all the same size. I am putting 2 Craig Barr 52100 hawks together and have 19" hafts that are the right fit. But I also want 22" hafts and the only ones I found online are made for CS hawks, so I bought 2 and now I have a lot of sanding to do!

Here's a couple of places I found hafts on the net. R.E Davis Co. has 18", 20" & 22" curly maple. Scroll to the middle of the page.

http://www.redaviscompany.com/edgedweapons.html

Here's a couple more sites. Hope this helps.

http://www.black-bear-haversack.com/index.php/cPath/220_831?osCsid=c56a8edd83aad6b9b669a71181f2c9cb

http://www.mountaintoptradingco.com/tomahawk.asp

http://www.trackofthewolf.com/Categories/PartList.aspx?catID=9&subID=60&styleID=233&PageSize=10&Page=2

http://www.hawkinsknifemakingsupplies.com/7.shtml

http://www.dunlapwoodcrafts.com/TomahawkHandles.php

http://www.dixiegunworks.com/default.php?cPath=22_104_536_541&osCsid=fc96b7e496f0172818ce655234a79c6e

 

[JackHammer]

Here's a couple of places I found hafts on the net. R.E Davis Co. has 18", 20" & 22" curly maple. Scroll to the middle of the page.

http://www.redaviscompany.com/edgedweapons.html

Here's a couple more sites. Hope this helps.

http://www.black-bear-haversack.com/index.php/cPath/220_831?osCsid=c56a8edd83aad6b9b669a71181f2c9cb

http://www.mountaintoptradingco.com/tomahawk.asp

http://www.trackofthewolf.com/Categories/PartList.aspx?catID=9&subID=60&styleID=233&PageSize=10&Page=2

http://www.hawkinsknifemakingsupplies.com/7.shtml

http://www.dunlapwoodcrafts.com/TomahawkHandles.php

http://www.dixiegunworks.com/default.php?cPath=22_104_536_541&osCsid=fc96b7e496f0172818ce655234a79c6e

Thanks Prophet, I checked them all out but none have 22" except the first and they want $30 each. The measurements of the top end I'm looking for are 1-1/2" X 1". But I'll save a few of them for when I need 19" hafts.

 

[Kenny H.]

Tear drop is the general shape for hawk eyes.