Hello Folks,
I have the following fixed blades for sale, please take note that all are plain edged and most have seen some use, please just assume, unless otherwise stated that they have seen some use! I am liquidating a good portion of my collection because the Wife and I are planning to travel through Mexico for the next year or so and I do not want them just sitting in a box! I am open to any reasonable offer and PLEASE let me know if you think my prices are out of line...... I am not easily offended and today marks the first time I have ever really tried to sell here on BF. Thank you for looking and please note that the prices do not include shipping..... I am willing to split the cost of sending any blade to you via Priority mail. Most everything here, except the GTI machete should ship in a standard size "free" box with tracking for, lets say $2.50... sound fair? I would prefer PayPal to expedite these sales! If you are unhappy with any blade, please contact me and I will do my best to make it right! So onto the "Fund Our Year in Mexico" for sale thread!!!
Spyderco:
NIB Spyderco Mule Team1. 52100 steel @62 hr, this was handled when received, wiped with oil and put back in box, only taken out a second time to take pics! $125 SOLD to KDJ2121
NIB Spyderco Mule Team 3 S90V steel, this was handled when received wiped with with oil and put away until these pics were taken. $125 SOLD to KDJ2121
Used Spyderco KX06P Kitchen utility knife, for the life of me, I can not remember what made us think that we were wise and .... whoops I can not remember what they called this one, but a nice little 6" utility knife for kitchen use.... I noticed before pics that it has a very small chip on the blade that would easily sharpen out, I sharpened this on my edge pro to about 15 degrees, probably a little too delicate for the way my Asian Wife swings a cleaver!lol A small amount of patina on the blade, but a small amount of sharpening and it will serve for years to come! How about $40 NOW $30
LNIB Buck Small Skinner, 4" blade 420 steel, Bos heat treat. Comes with box and cordura sheath. I got this in a package deal here on BF and have never used it. I, just now, cut paper with it to check sharpness and it cleanly cuts printer paper $20 SOLD to TravisH
Others:
LN in Sheath Tops Lancero, I must admit, this one pains me a little..... I have to say, it is about the perfect all around sized fixed blade. That said, it has only cut a few pieces of paper and dispatched a charging, wounded ground hog! Simonich designed .200 thick, 6 1/2" long blade of Diamondite 3V steel , Bos heat treated these blades for Tops to a supposed 62rc. Comes with a very nice sheath with a pocket for a Leatherman or sharpening stone. How about $160? NOW $145 SOLD
Wolverine "Chub" Black micarta, 2 1/2" blade of 52100 steel. This marked as "First Production Run I of 250 2003" Neat little knife that should work well for most outdoor tasks..... Unfortunately I didn't keep this one as well oiled as I should have, so it has some light speckling. $75 now $50
Customs:
Wilkins custom "Thorn": 3" blade of M2 steel @64rc. Really nice grinds, bought it used and have used it sparingly, could use an edge "touch up", M2 gets blazing sharp and at this rc it should hold an edge for quite a while. Comes with Kydex sheath, that fits really well (clicks), plenty secure for neck carry, that is how I carried it, but also has a very nice leather, belt sheath from the maker. There is some "bluing wear", but overall a very nice specimen in a very rare steel from Kevin. $160 SPF
"Pete" Moon Bird and Trout style blade 3" of S60V steel, ironwood scales with well made Kydex sheath that is very secure. Pete does S60V really well and though the knife has been used, it shows almost new and has never needed a sharpening! I contacted Pete a year or two back and he said target hardness was 62rc on his S60V blades.... Very nice edc , hunting knife etc. for a fraction of the cost of comparable knives with comparable steel! $125 SOLD
DCL Pocket carry 3" modified sheepsfoot(?) of 3V steel @61rc Peters Heat treated I do not remember cutting anything with it? Very nice leather, pocket carry sheath, unfortunately it has a Spyderco style slip and just like ALL of my Spydercos, I bent it quickly! Could be bent back, other wise looks new, a few finishing marks and came to me "workable sharp", not blazing, I would sharpen to a higher degree if I was keeping it, but I am not, so that will be your job!lol $125 SOLD
Remy 3 1/2" EDC, paracord wrapped handle. 1080 steel hardened to 60rc, Scratches, staining on blade, my first ever custom from BF maker. Used plenty.... "rode hard put away wet", but still lots of life. could use a sharpening, but plenty of life left in this blade. How about $40? NOW $25
GTI Justin Gingrich Machete 18" blade of convex ground, 3v steel...... This thing has been used and come through with flying colors!!! i am only keeping one big knife and this came in a close second to my Swamp Rat 1311. I have chopped, cleared brush, etc. with this thing and it absolutely rocks! Yes it is stained. No it is no longer perfectly straight... It has brown and green G10 scales, that were sent to Justin by the original owner. The blade is the original owners personal design, and he was spot on, in my opinion, about what a machete should be. There is some small/minor blade chipping that would easily be cleaned up or just send it back to GTI and have Justin give it a "spa treatment"......BAM, it will be ready for more! I do not have a sheath for it, I lost the cheap, surplus one I was using, easily enough replaced for $5 or $10. How about $150!!! That is a lot of 3V steel for that money!lol SOLD
Pics will be up soon! I think that is all for now.... as other stuff "turns up", I will list it! My Paypal is fastevo@centurytel.net
Thank you BF and regards, Steve
I have the following fixed blades for sale, please take note that all are plain edged and most have seen some use, please just assume, unless otherwise stated that they have seen some use! I am liquidating a good portion of my collection because the Wife and I are planning to travel through Mexico for the next year or so and I do not want them just sitting in a box! I am open to any reasonable offer and PLEASE let me know if you think my prices are out of line...... I am not easily offended and today marks the first time I have ever really tried to sell here on BF. Thank you for looking and please note that the prices do not include shipping..... I am willing to split the cost of sending any blade to you via Priority mail. Most everything here, except the GTI machete should ship in a standard size "free" box with tracking for, lets say $2.50... sound fair? I would prefer PayPal to expedite these sales! If you are unhappy with any blade, please contact me and I will do my best to make it right! So onto the "Fund Our Year in Mexico" for sale thread!!!
Spyderco:
NIB Spyderco Mule Team1. 52100 steel @62 hr, this was handled when received, wiped with oil and put back in box, only taken out a second time to take pics! $125 SOLD to KDJ2121
NIB Spyderco Mule Team 3 S90V steel, this was handled when received wiped with with oil and put away until these pics were taken. $125 SOLD to KDJ2121
Used Spyderco KX06P Kitchen utility knife, for the life of me, I can not remember what made us think that we were wise and .... whoops I can not remember what they called this one, but a nice little 6" utility knife for kitchen use.... I noticed before pics that it has a very small chip on the blade that would easily sharpen out, I sharpened this on my edge pro to about 15 degrees, probably a little too delicate for the way my Asian Wife swings a cleaver!lol A small amount of patina on the blade, but a small amount of sharpening and it will serve for years to come! How about $40 NOW $30
LNIB Buck Small Skinner, 4" blade 420 steel, Bos heat treat. Comes with box and cordura sheath. I got this in a package deal here on BF and have never used it. I, just now, cut paper with it to check sharpness and it cleanly cuts printer paper $20 SOLD to TravisH
Others:
LN in Sheath Tops Lancero, I must admit, this one pains me a little..... I have to say, it is about the perfect all around sized fixed blade. That said, it has only cut a few pieces of paper and dispatched a charging, wounded ground hog! Simonich designed .200 thick, 6 1/2" long blade of Diamondite 3V steel , Bos heat treated these blades for Tops to a supposed 62rc. Comes with a very nice sheath with a pocket for a Leatherman or sharpening stone. How about $160? NOW $145 SOLD
Wolverine "Chub" Black micarta, 2 1/2" blade of 52100 steel. This marked as "First Production Run I of 250 2003" Neat little knife that should work well for most outdoor tasks..... Unfortunately I didn't keep this one as well oiled as I should have, so it has some light speckling. $75 now $50
Customs:
Wilkins custom "Thorn": 3" blade of M2 steel @64rc. Really nice grinds, bought it used and have used it sparingly, could use an edge "touch up", M2 gets blazing sharp and at this rc it should hold an edge for quite a while. Comes with Kydex sheath, that fits really well (clicks), plenty secure for neck carry, that is how I carried it, but also has a very nice leather, belt sheath from the maker. There is some "bluing wear", but overall a very nice specimen in a very rare steel from Kevin. $160 SPF
"Pete" Moon Bird and Trout style blade 3" of S60V steel, ironwood scales with well made Kydex sheath that is very secure. Pete does S60V really well and though the knife has been used, it shows almost new and has never needed a sharpening! I contacted Pete a year or two back and he said target hardness was 62rc on his S60V blades.... Very nice edc , hunting knife etc. for a fraction of the cost of comparable knives with comparable steel! $125 SOLD
DCL Pocket carry 3" modified sheepsfoot(?) of 3V steel @61rc Peters Heat treated I do not remember cutting anything with it? Very nice leather, pocket carry sheath, unfortunately it has a Spyderco style slip and just like ALL of my Spydercos, I bent it quickly! Could be bent back, other wise looks new, a few finishing marks and came to me "workable sharp", not blazing, I would sharpen to a higher degree if I was keeping it, but I am not, so that will be your job!lol $125 SOLD
Remy 3 1/2" EDC, paracord wrapped handle. 1080 steel hardened to 60rc, Scratches, staining on blade, my first ever custom from BF maker. Used plenty.... "rode hard put away wet", but still lots of life. could use a sharpening, but plenty of life left in this blade. How about $40? NOW $25
GTI Justin Gingrich Machete 18" blade of convex ground, 3v steel...... This thing has been used and come through with flying colors!!! i am only keeping one big knife and this came in a close second to my Swamp Rat 1311. I have chopped, cleared brush, etc. with this thing and it absolutely rocks! Yes it is stained. No it is no longer perfectly straight... It has brown and green G10 scales, that were sent to Justin by the original owner. The blade is the original owners personal design, and he was spot on, in my opinion, about what a machete should be. There is some small/minor blade chipping that would easily be cleaned up or just send it back to GTI and have Justin give it a "spa treatment"......BAM, it will be ready for more! I do not have a sheath for it, I lost the cheap, surplus one I was using, easily enough replaced for $5 or $10. How about $150!!! That is a lot of 3V steel for that money!lol SOLD
Pics will be up soon! I think that is all for now.... as other stuff "turns up", I will list it! My Paypal is fastevo@centurytel.net
Thank you BF and regards, Steve
Attachments
Last edited:
