Tracker-like custom - SOLD

palmerdl

Gold Member
Feedback: +100 / =0 / -0
Joined
Jan 26, 2009
Messages
469
In case you haven't figured it by now, I'm cleaning house. Too many neglected knives. Getting to the point where I have to think about the kids dealing with the accumulation when I'm gone. Too many neglected knives.
syOKMQK.jpg

cjAOerJ.jpg

updyUgq.jpg

Don't remember all the particulars on this one. Purchased several years ago on another forum. It was a custom made to the original owners specs. If you expand the first photo, there is a 'B' inscribed near the top of the ricasso. Might help identify the maker. or previous owner? It was suggested that the mark is maker Bryan Breedan. No definitive answer.
13" OAL, 7.25" blade, 0.239" thick, 2.5" at the widest point, 22 oz.knife only. Not sure on the steel, but memory says 1095 or 5160. Carbon steel, one way or another. 0.060" Kydex w/ dangler and a narrow belt loop for 1.5" maybe a tight fit 1.75" belt. Original owner cold blued the blade. The scraper is fairly squared off and the forward part of the spine is rounded for comfortable use as a draw knife. Bites pretty deep when chopping. The primary grind is convex running smoothly into the flat. I have sharpened it and it's sharp, for sure. $135 shipped, PayPal G&S only, CONUS only, no trades.
 
Last edited:
Back
Top