The knives: http://www.bladeforums.com/forums/attachment.php?attachmentid=80108&d=1191772814 (Yojimbo in picture is not for trade)
1. BM 420 CE. Has seen light use, still in superb condition, just has a couple very minor cosmetic flaws and has been sharpened once on the PE portion using fine ceramic rods.
**TRADED**2. BM 425 PE. Coated blade. Was sharpened once or twice by previous owner, otherwise in like new condition.
**TRADED**3. Kershaw Mini Cyclone PE. Like new with box. Opened and closed it some and cut one or two things with it, that's all. Please note this is the regular version in 13C27, not the Ti/ZDP version.
**TRADED**4. Spyderco Endura SE. Fully serrated, stainless handles, excellent condition. Only cut one or two things with it and switched the clip to tip up. I'm not sure if it's version 2 or 3, but it's one of the older models.
**SOLD**5. Spyderco Endura 3 PE. Used. Was SE, re-ground to PE. Thinner than a stock Endura grind. Also added a choil in the FRN handle. Clip is more gray than black. Lock-up and action still tight.
6. Kershaw Storm PE. Black coated small version. Reprofiled heavily. Was used as a "beater" but didn't get pulled out as much as the Endura 3, so it's still in excellent shape aside from a scratch or two on the handle and my ugly reprofiling job.
**Sold**7. Opinel #8. Great condition, previous owner sharpened it.
8. Victorinox Spartan. New no box.
9. Victorinox Bantam. Used, reprofiled blade and modified screwdriver tip.
**WITHDRAWN**10. Victorinox Trekker. Like new no box. Used the screwdriver once and whittled some shavings with the blade. Looks new. Note this is the two handed PE version.
11. Brusletto Balder. See it at www.ragweedforge.com Like new condition. It came to me with a bad burr but well formed edge, so I used a ceramic rod with very light passes at a raised angle to remove the burr, then stropped it to a hair popping sharp edge. Looking at the blade you wouldn't know I sharpened it at all if I didn't tell you.
Spydercos (Manix, D'allara, Cricket, Para, Kiwi, Centofante 3 or 4, Caly)
Kershaws (G10 Bump, Groove, ZT0200, JYD2, Lahar, either Ener-g)
Byrds
Benchmades (AFCK, Ares, Mini Rukus and others)
Boker Trance
Slipjoints
Flashlights
Coarse or Extra Course DMT diamond stones
Can combine knives and add cash for more expensive knives.
Will take a look at other offers besides what's on my list.
Can trade back if knives do not meet your requirements.
Additional photos upon email request request
Raumien@gmail.com
1. BM 420 CE. Has seen light use, still in superb condition, just has a couple very minor cosmetic flaws and has been sharpened once on the PE portion using fine ceramic rods.
**TRADED**2. BM 425 PE. Coated blade. Was sharpened once or twice by previous owner, otherwise in like new condition.
**TRADED**3. Kershaw Mini Cyclone PE. Like new with box. Opened and closed it some and cut one or two things with it, that's all. Please note this is the regular version in 13C27, not the Ti/ZDP version.
**TRADED**4. Spyderco Endura SE. Fully serrated, stainless handles, excellent condition. Only cut one or two things with it and switched the clip to tip up. I'm not sure if it's version 2 or 3, but it's one of the older models.
**SOLD**5. Spyderco Endura 3 PE. Used. Was SE, re-ground to PE. Thinner than a stock Endura grind. Also added a choil in the FRN handle. Clip is more gray than black. Lock-up and action still tight.
6. Kershaw Storm PE. Black coated small version. Reprofiled heavily. Was used as a "beater" but didn't get pulled out as much as the Endura 3, so it's still in excellent shape aside from a scratch or two on the handle and my ugly reprofiling job.
**Sold**7. Opinel #8. Great condition, previous owner sharpened it.
8. Victorinox Spartan. New no box.
9. Victorinox Bantam. Used, reprofiled blade and modified screwdriver tip.
**WITHDRAWN**10. Victorinox Trekker. Like new no box. Used the screwdriver once and whittled some shavings with the blade. Looks new. Note this is the two handed PE version.
11. Brusletto Balder. See it at www.ragweedforge.com Like new condition. It came to me with a bad burr but well formed edge, so I used a ceramic rod with very light passes at a raised angle to remove the burr, then stropped it to a hair popping sharp edge. Looking at the blade you wouldn't know I sharpened it at all if I didn't tell you.
Spydercos (Manix, D'allara, Cricket, Para, Kiwi, Centofante 3 or 4, Caly)
Kershaws (G10 Bump, Groove, ZT0200, JYD2, Lahar, either Ener-g)
Byrds
Benchmades (AFCK, Ares, Mini Rukus and others)
Boker Trance
Slipjoints
Flashlights
Coarse or Extra Course DMT diamond stones
Can combine knives and add cash for more expensive knives.
Will take a look at other offers besides what's on my list.
Can trade back if knives do not meet your requirements.
Additional photos upon email request request
Raumien@gmail.com
